- 您現在的位置：買賣IC網 > PDF目錄180540 > MAX9952FCCB-D (MAXIM INTEGRATED PRODUCTS INC) Dual Per-Pin Parametric Measurement Units PDF資料下載
參數資料
| 型號： | MAX9952FCCB-D |
| 廠商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分類： | 電源管理 |
| 英文描述： | Dual Per-Pin Parametric Measurement Units |
| 中文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQFP64 |
| 封裝： | 10 X 10 MM, 0.50 MM PITCH, TQFP-64 |
| 文件頁數： | 1/24頁 |
| 文件大小： | 392K |
| 代理商： | MAX9952FCCB-D |
General Description
The MAX9951/MAX9952 dual parametric measurement
units (PMUs) feature a small package size, wide force and
measurement range, and high accuracy, making the
devices ideal for automatic test equipment (ATE) and other
instrumentation that requires a PMU per pin or per site.
The MAX9951/MAX9952 force or measure voltages in the
-2V to +7V through -7V to +13V ranges, dependent upon
the supply voltage (VCC and VEE). The devices handle
supply voltages of up to +30V (VCC to VEE) and a 20V
device-under-test (DUT) voltage swing at full current. The
MAX9951/MAX9952 also force or measure currents up to
±64mA with a lowest full-scale range of ±2A. Integrated
support circuitry facilitates use of an external buffer ampli-
fier for current ranges greater than ±64mA.
A voltage proportional to the measured output voltage
or current is provided at the MSR_ output. Integrated
comparators, with externally set voltage thresholds,
provide detection for both voltage and current levels.
The MSR_ and comparator outputs can be placed in a
high-impedance state. Separate FORCE and SENSE
connections are short-circuit protected for voltages
from (VEE - 0.3V) to (VCC + 0.3V). The FORCE output
also features a low-leakage, high-impedance state.
Integrated voltage clamps limit the force output to lev-
els set externally. The force-current or the measure-cur-
rent voltage can be offset -0.2V to +4.4V (IOS). This
feature allows for the centering of the control or mea-
sured signal within the external DAC or ADC range.
The MAX9951D/MAX9952D feature an integrated 10k
Ω
force-sense resistor between FORCE_ and SENSE_.
The MAX9951F/MAX9952F have no internal force-sense
resistor. These devices are available in a 64-pin, 10mm
x 10mm, 0.5mm pitch TQFP package with an exposed
8mm x 8mm die pad on the top (MAX9951) or the bot-
tom (MAX9952) of the package for efficient heat
removal. The exposed pad is internally connected to
VEE. The MAX9951/MAX9952 are specified over the
commercial 0°C to +70°C temperature range.
Applications
Memory Testers
VLSI Testers
System-on-a-Chip Testers
Structural Testers
Features
Force Voltage/Measure Current (FVMI)
Force Current/Measure Voltage (FIMV)
Force Voltage/Measure Voltage (FVMV)
Force Current/Measure Current (FIMI)
Force Nothing/Measure Voltage (FNMV)
Force Nothing/Measure Current (FNMI,
Range E Only)
Termination/Measure Current
Termination/Measure Voltage
Five Programmable Current Ranges
±2A
±20A
±200A
±2mA
±64mA
-2V to +7V Through -7V to +13V Input-Voltage
Range
Force-Current/Measure-Current Adjustable-
Voltage Offset (IOS)
Programmable Voltage Clamps at Force Output
Low-Leakage, High-Impedance Measure, and
Force States
3-Wire Serial Interface
Low 6mA (max) Quiescent Current per PMU
MAX9951/MAX9952
Dual Per-Pin Parametric
Measurement Units
________________________________________________________________
Maxim Integrated Products
1
Ordering Information
19-3247; Rev 5; 5/10
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
+
Denotes a lead(Pb)-free/RoHS-compliant package.
-
Denotes a package containing lead(Pb).
D = Dry pack.
*
EPR = Top side exposed pad.
T = Tape and reel.
**
EP = Exposed pad.
Pin Configurations and Selector Guide appear at end of
data sheet.
PART
TEMP RANGE
PIN-PACKAGE
MAX9951DCCB+D
0°C to +70°C
64 TQFP-EPR*
MAX9951DCCB+TD
0°C to +70°C
64 TQFP-EPR*
MAX9951DCCB-D
0°C to +70°C
64 TQFP-EPR*
MAX9951DCCB-TD
0°C to +70°C
64 TQFP-EPR*
MAX9951FCCB+
0°C to +70°C
64 TQFP-EPR*
MAX9951FCCB+T
0°C to +70°C
64 TQFP-EPR*
MAX9951FCCB-D
0°C to +70°C
64 TQFP-EPR*
MAX9951FCCB-TD
0°C to +70°C
64 TQFP-EPR*
MAX9952DCCB+
0°C to +70°C
64 TQFP-EP**
MAX9952DCCB+T
0°C to +70°C
64 TQFP-EP**
MAX9952DCCB-D
0°C to +70°C
64 TQFP-EP**
MAX9952DCCB-TD
0°C to +70°C
64 TQFP-EP**
MAX9952FCCB+
0°C to +70°C
64 TQFP-EP**
MAX9952FCCB+T
0°C to +70°C
64 TQFP-EP**
MAX9952FCCB-D
0°C to +70°C
64 TQFP-EP**
MAX9952FCCB-TD
0°C to +70°C
64 TQFP-EP**
相關PDF資料 |
PDF描述 |
|---|---|
| MAX9952FCCB-TD | Dual Per-Pin Parametric Measurement Units |
| MAX9961ADCCQ-D | Dual, Low-Power, 500Mbps ATE Drivers/Comparators with 2mA Load |
| MAX9961ADCCQ-TD | Dual, Low-Power, 500Mbps ATE Drivers/Comparators with 2mA Load |
| MAX9961ALCCQ-D | Dual, Low-Power, 500Mbps ATE Drivers/Comparators with 2mA Load |
| MAX9961ALCCQ-TD | Dual, Low-Power, 500Mbps ATE Drivers/Comparators with 2mA Load |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAX9952FCCB-TD | 功能描述:接口 - 專用 RoHS:否 制造商:Texas Instruments 產品類型:1080p60 Image Sensor Receiver 工作電源電壓:1.8 V 電源電流:89 mA 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:BGA-59 |
| MAX9955BDCCB+D | 制造商:Maxim Integrated Products 功能描述:DUAL DRIVER/TERMINATOR WITH CABLE-D - Rail/Tube |
| MAX9955BDCCB-D | 功能描述:校驗器 IC RoHS:否 制造商:STMicroelectronics 產品: 比較器類型: 通道數量: 輸出類型:Push-Pull 電源電壓-最大:5.5 V 電源電壓-最小:1.1 V 補償電壓（最大值）:6 mV 電源電流（最大值）:1350 nA 響應時間: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SC-70-5 封裝:Reel |
| MAX9955BDCCB-TD | 功能描述:校驗器 IC RoHS:否 制造商:STMicroelectronics 產品: 比較器類型: 通道數量: 輸出類型:Push-Pull 電源電壓-最大:5.5 V 電源電壓-最小:1.1 V 補償電壓（最大值）:6 mV 電源電流（最大值）:1350 nA 響應時間: 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:SC-70-5 封裝:Reel |
| MAX9957CCB+D | 制造商:Maxim Integrated Products 功能描述:FAST DUAL DRIVER FOR ATE WITH WAVEF - Rail/Tube |
發布緊急采購，3分鐘左右您將得到回復。