
MB86619
IEEE 1394 Serial Bus Controller for DTV
Copyright 2002 Fujitsu Microelectronics Europe GmbH
Page 1 of 2
Disclaimer:
The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before
ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.
Product Profile
September 2002
Edition 1.00
FME/MM/PP/0902
OVERVIEW
The MB86619 is one member of Fujitsu’s 1394 serial bus controller family
, compliant with IEEE1394 standard (IEEE
Std 1394-1995, 1394a-2000). This controller has two exclusive ports for isochronous transfer (MPEG-TS, DV) and three
ports for 1394 network including differential transceivers and compurgators.
The MB86619
integrates PHY layer, LINK layer and copy protection part (DTCP) supporting 400Mbps data transfer rate.
This level of integration let this device aim a significant reduction of board mounting space and power consumption.
FEATURES
Compliant with IEEE1394-1995 and 1394.a-2000 high speed serial bus standard
Integrate PHY layer and the LINK layer in the single-chip
Three 1394 cable ports
Transfer data rate: S100, S200 and S400
Supports AV protocol (IEC1883 Part1-7: MPEG-TS, DSS, DV, Audio)
Supports SBP-2 protocol with read/write chain transfer mode
Supports Asynchronous serial bus connection
Isochronous transmit/receive FIFO is 4Kbytes* 2 channels
Asynchronous transmit/receive FIFO is 512 bytes
Asynchronous extended transmit/receive FIFO is 2Kbytes
Automatic separation and picketing for the Isochronous packet header and data
Two exclusive ports for Isochronous transfer (8 bit bus)
IEC60958 and three line type input-output port for the audio data transfer.
Integrate copy protect function compliant with DTCP
16bits MPU/DMA common or separate bus interlace
Power-supply voltage 3.3V for IO and 2.5V for internal logic
Package LQFP-176 (FPT-176P-M03)