
FUJITSU MICROELECTRONICS
DATA SHEET
Copyright2007-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved
2008.8
The information for microcontroller supports is shown in the following homepage.
Be sure to refer to the "Check Sheet" for the latest cautions on development.
"Check Sheet" is seen at the following support page
"Check Sheet" lists the minimal requirement items to be checked to prevent problems beforehand in
system development.
http://edevice.fujitsu.com/micom/en-support/
16-bit Microcontroller
CMOS
F2MC-16LX MB90960 Series
MB90F962(S), MB90F967(S),
MB90V340E-101/102/103/104
■ DESCRIPTION
The MB90960-series is a 16-bit general-purpose microcontroller. Fujitsu Microelectronics now offers on-chip
Flash-ROM program memory up to 64 Kbytes.
The power supply (3 V) is supplied to the internal MCU core from an internal regulator circuit. This creates
a major advantage in terms of EMI and power consumption.
The unit features a 4 channel input capture unit, 1 channel 16-bit free-run timer, 2-channel LIN-UART, and
16-channel 8/10-bit A/D converter as the peripheral resource.
Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURES
Clock
Built-in PLL clock frequency multiplying circuit
Machine clock (PLL clock) selectable from frequency division by 2 of oscillation clock or 1 to 6-multiplied
oscillation clock (4 MHz to 24 MHz when oscillation clock is 4 MHz) .
Sub clock operation : Up to 50 kHz (devices without S-suffix only)
Minimum instruction execution time : 42 ns (4 MHz oscillation clock and 6-multiplied PLL clock) .
Clock supervisor (MB90F967 (S) only)
Main clock or sub clock is monitored independently
(Continued)
DS07-13749-2E