- 您現在的位置：買賣IC網 > PDF目錄215885 > MSPLCE160A (MICROSEMI CORP-SCOTTSDALE) 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE PDF資料下載
參數資料
| 型號： | MSPLCE160A |
| 廠商： | MICROSEMI CORP-SCOTTSDALE |
| 元件分類： | TVS二極管 - 瞬態電壓抑制 |
| 英文描述： | 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| 封裝： | PLASTIC, CASE 1, 2 PIN |
| 文件頁數： | 1/4頁 |
| 文件大小： | 225K |
| 代理商： | MSPLCE160A |
1500 WATT LOW CAPACITANCE
TRANSIENT VOLTAGE SUPPRESSOR
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
WWW
.Microse
S C O T TS DALE DIVISION
Copyright
2008
10-29-2008 REV F
m
i
.CO
M
LCE6.5 thru LCE170A, e3
LCE6.5
thru
LCE170A,
e3
DESCRIPTION
APPEARANCE
This Transient Voltage Suppressor (TVS) product family includes a rectifier
diode element in series and opposite direction to achieve low capacitance
performance below 100 pF (see Figure 2). The low level of TVS capacitance
may be used for protecting higher frequency applications in inductive
switching environments or electrical systems involving secondary lightning
effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for
airborne avionics. With virtually instantaneous response, they also protect
from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient
capability is required, two of these low capacitance TVS devices may be used
in parallel in opposite directions (anti-parallel) for complete ac protection as
shown in Figure 4.
CASE 1
IMPORTANT:
For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
Unidirectional low-capacitance TVS (for bidirectional see
Figure 4)
Economical plastic encapsulated TVS series for thru-
hole mounting
Suppresses transients up to 1500 watts @ 10/1000 s
(see Figure 1)*
Clamps transient in less than 100 pico seconds
Working voltage (VWM) range 6.5 V to 170 V
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are also
available by adding MQ, MX, MV, MSP prefixes
respectively to part numbers, e.g. MXLCE6.5A,
MVLCE45A, etc.
Surface mount equivalent packages also available as
SMCJLCE6.5 - SMCJLCE170A or SMCGLCE6.5 -
SMCGLCE170A in separate data sheet (consult factory
for other surface mount options)
RoHS Compliant devices available by adding “e3” suffix
Metal hermetically sealed DO-13 axial-leaded
equivalents available in the LC6.5 - LC170A series in
separate data sheet
Protection from switching transients and induced RF
Low capacitance for data line protection to 1 MHz
Protection for aircraft fast data rate lines up to Level 5
Waveform 4 and Level 2 Waveform 5A in RTCA/DO-
160D (also see MicroNote 130) & ARINC 429 with bit
rates of 100 kb/s (per ARINC 429, Part 1, par 2.4.1.1)
Protection from ESD and EFT per IEC 61000-4-2 and
IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1: LCE6.5 to LCE170A
Class 2: LCE6.5 to LCE150A
Class 3: LCE6.5 to LCE70A
Class 4: LCE6.5 to LCE36A
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1 : LCE6.5 to LCE90A
Class 2: LCE6.5 to LCE45 A
Class 3: LCE6.5 to LCE22A
Class 4: LCE6.5 to LCE11A
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2: LCE6.5 to LCE20A
Class 3: LCE6.5 to LCE10A
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
1500 Watts for 10/1000 μs with repetition rate of 0.01% or
less*
at lead temperature (TL) 25
oC (See Figs. 1, 2, & 4)
Operating & Storage Temperatures: -65o to +150oC
Thermal Resistance: 22C/W junction to lead at 3/8
inch (10 mm) from body, or 82
C/W junction to ambient
when mounted on FR4 PC board with 4 mm
2 copper
pads (1oz) and track width 1 mm, length 25 mm
Steady-State Power dissipation*: 5 watts at TL = 40oC,
or 1.52 watts at TA = 25
C when mounted on FR4 PC
board described for thermal resistance
Solder Temperatures: 260
o C for 10 s (maximum)
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINATIONS: Tin-lead or RoHS Compliant
annealed matte-Tin plating readily solderable per
MIL-STD-750 method 2026
POLARITY: Cathode indicated by band
MARKING: Part number and polarity band
WEIGHT: 1.5 grams. (Approx)
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
See “CASE 1” package dimensions on last page
* TVS devices are not typically used for dc power dissipation and are instead operated < VWM (rated standoff voltage) except for transients that briefly
drive the device into avalanche breakdown (VBR to VC region) of the TVS element. Also see Figures 3 and 4 for further protection details in rated peak
pulse power for unidirectional and bidirectional configurations respectively.
相關PDF資料 |
PDF描述 |
|---|---|
| MSPLCE8.5A | 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| MSPMPTE-45C | 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE |
| MVLC33ATR | 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-202AA |
| MVLC45 | 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-202AA |
| MVLC8.5A | 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-202AA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MSPM- 3-01 | 制造商:Richco 功能描述:Bulk |
| MSPM- 4-01 | 制造商:Richco 功能描述:Bulk |
| MSPM- 5-01 | 制造商:Essentra Components/Richco 功能描述: |
| MSPM- 6-01 | 制造商:Essentra Components/Richco 功能描述: |
| MSPM- 7-01 | 制造商:Essentra Components/Richco 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。