
E-mail: enquiry@mtl-inst.com Web site: www.mtl-inst.com
Tel: +65 487 7887
Tel: +65 487 7887
Tel: +65 487 7887
Tel: +65 487 7887
Tel: +65 487 7887
Fax: +65 487 7997
Fax: +65 487 7997
Fax: +65 487 7997
Fax: +65 487 7997
Fax: +65 487 7997
June 2004
AMERICAS
Tel: +1 603 926 0090
Fax: +1 603 926 1899
ASIA PACIFIC
AMERICAS
AMERICAS
AMERICAS
Tel: +44 (0)1582 723633
Fax: +44 (0)1582 422283
EUROPE (EMEA)
SPECIFICATION
(For both MTL5113P and MTL5114P unless otherwise indicated.)
See also common specification
Number of channels
One
Location of switches
Zone 0, IIC, T6 hazardous area
Div. 1, Group A hazardous location
Location of proximity detector
Zone 0, IIC, T4–6, hazardous location
Div 1, Group A, hazardous location
Voltage applied to sensor
8.6V dc max from 1k
Input/output characteristics
Fail-safe electronic output
Output on: > 22.8V
Output off: 0V dc, max <5V dc
Load: 2.4k
to 10k
Maximum on-state current: 11mA
Short-circuit current: 25mA
Line fault detection (LFD), MTL5113P only
Relay output for line fault (contacts open when line fault detected)
Switch characteristics: 0.3A 110V ac/dc, 1A 30V dc, 30W/33VA
LED indicators
Amber: one provided for output status, ON when fail-safe output
is energised
Green: one provided for power indication
Red: one provided for LFD, ON when line fault is detected
(MTL5113P only)
Power requirements, Vs
MTL5113P
MTL5114P
80mA
70mA
at 20V dc
70mA
60mA
at 24V dc
65mA
45mA
at 35V dc
Input value in sensor circuit Fail-safe
Operation
LFD contacts
(MTL5113x
only)
output
MTL5113P, MTL5114P
2.9mA<Is<3.9mA
ON
Normal
CLOSED
MTL5113P, MTL5114P
Is<1.9mA & Is>5.1mA
OFF
Normal
CLOSED
MTL5113P
Is<50μA
OFF
Broken line
OPEN
MTL5113P
Is>6.6mA
OFF
Shorted line
OPEN
With the MTL5113P/5114P, a fail-safe switch/proximity detector
located in the hazardous area can control an isolated fail-safe
electronic output. The MTL5113P units provide line-fault detection
alarm contacts. The MTL5113P and MTL5114P are for use with P + F
TüV approved fail-safe sensors.
MTL5113P AND 5114P
FAILSAFE
SWITCH/PROXIMITY
DETECTOR INTERFACE
LFD option
Hazardous area Safe area
Terminal
1
2
7
8
11
12
13
14
Function
Input –ve
Input +ve
Output –ve
Output +ve
LFD (MTL5113P only)
LFD (MTL5113P only)
Supply –ve
Supply +ve
Note: Is = sensor current
Power dissipation within unit
MTL5113P
1.4W
1.5W
2.0W
Safety description
9.7V, 30mA, 70mW, Ci=33nF, Li=0mH
Weight
160g approx.
MTL5114P
1.2W
1.3W
1.4W
at 20V dc
at 24V dc
at 35V dc
Note: switch-type sensors must be fitted with resistors as shown
*/0
!1%
2!! "
!#$%!