
OC192 OCXO Series
1.4"x1.06" Nominal Thru-Hole Oven Controlled Xtal Oscillator
Electronic Adjustment
Standard Specifications
Overall Frequency
± 5 x 10 -9 over Operating Temperature Range available
Operating Temperature Range
0 to +50°C to -30 to +70°C available
Supply Voltage (Vdc)
+5 to +12 Vdc available
Output Load (Test Circuit TBD)
10 TTL Loads or 15pF
50 ohms
Phase Noise
Consult Factory
Jitter
Consult Factory
Oven Monitor
Consult Factory
Part Numbering Guide
Frequency in MHz
Frequency Stability
OC192
H 5
A
27 - 10.0M - XXX (Internal Code or blank)
Consult factory for
available frequencies
and specs. Not all
options available
for all frequencies.
A special p/n may
be assigned.
27 = ±2 x 10 -7
59 = ±5 x 10 -9
17 = ±1 x 10 -7
Frequency Stability
is inclusive of
frequency shifts due
to calibration,
temperature, supply
voltage, shock,
vibration and load
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
TBD
Oct 31, 2003
Pl tronics, Inc.
Mechanical:
not to scale
inches (mm)
HCMOS
Sine Wave
Operating Temperature Range
A: 0 to +50°C
B: 0 to +70°C
C: -10to+70°C
D: -20 to +70°C
E:-30to+70°C
Model Series
Stability
vs. Temp
vs. Vdc / Load
Aging
± 1 x 10 -8 for ± 5% load or supply change
± 1 PPM max. for 10 years at 25°C ± 5°C at 10 MHz (Consult factory for other frequencies)
Frequency Adj
Electrical: ± 1 PPM typical
Output Logic
PECL
Logic “1” 90% of Vcc min
Logic “0” 10% of Vcc max
Output Voltage Levels
Supply Current (Icc)
2.0 Watts typical steady state, 5.5 Watts maximum at turn-on
Logic
H: HCMOS
S: Sine Wave
P: PECL
T: TTL
Consult Factory
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Pl tronics, Inc.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
.
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
PLETRONICS
OC192
XXXXXX
FREQUENCY
DATE CODE
Supply Voltage
3: +3.3 Vdc, consult factory
5: +5.0 Vdc
12: +12.0 Vdc
TTL
Consult Factory
+7 dBm typical
Standard Frequencies: 10 & 40 MHz
10.00 MHz – 60.00 MHz
1
4
2
5
1.417 (36.0)
PIN 2 10K Wiper end
PIN 3 10K One end
PIN 1 GND, 10K Other end
PIN 5 Output
PIN 4 DC Input
1.00 (25.4)
1.079
(27.4)
.770 (19.55)
MAX
.70
(17.78)
.197 (5.0)
MIN
.209 (5.3)
Lead .031
± .003
Dia (.8) 5X
3
.35 (8.89)