- 您現在的位置：買賣IC網 > PDF目錄21864 > OPB830L55 (TT Electronics/Optek Technology)SENS OPTO SLOT 3.18MM TRANS THRU PDF資料下載
參數資料
| 型號： | OPB830L55 |
| 廠商： | TT Electronics/Optek Technology |
| 文件頁數： | 1/8頁 |
| 文件大小： | 220K |
| 描述： | SENS OPTO SLOT 3.18MM TRANS THRU |
| 標準包裝： | 1 |
| 檢測距離： | 0.125" (3.18mm) |
| 檢測方法： | 可傳導的 |
| 輸出配置： | 光電晶體管 |
| 電流 - DC 正向(If)： | 50mA |
| 電流 - 集電極 (Ic)（最大）： | 30mA |
| 電壓 - 集電極發射極擊穿（最大）： | 30V |
| 安裝類型： | 通孔 |
| 封裝/外殼： | PCB 安裝 |
| 包裝： | 散裝 |
| 類型： | 無放大 |
| 工作溫度： | -40°C ~ 85°C |
OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.2 10/08
Page 1 of 8
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Features:
" 0.125 (3.18 mm) wide slot
" Choice of electrical output parameters
" Choice of aperture
" Choice of opaque or IR transmissive shell material
" Side mount configuration
" Choice of lead spacing (L Series)
" 24 [610 mm] 26 AWG wire leads (W Series)
Description:
OPB830 and OPB840 series provide the design engineer with the flexibility of a custom device from a standard
product line. The L Series offers a choice of PCBoard mount lead spacing, while the W Series offers
24 (610mm) 26AWG wire leads.
Building from a standard housing that utilizes a .375 (9.5 mm) wide slot, a user can specify the electrical output
parameters, choice of aperture, discrete shell material, side mount configuration, and a choice of lead spacing (for
the L Series) or 24 [610 mm] UL approved 26 AWG wire leads (W Series).
Housings are made from an opaque grade of injection-molded plastic that minimizes the assemblys sensitivity to
visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device throat)
are made of either IR transmissive plastic (for applications where aperture contamination may occur) or of opaque
plastic with aperture openings (for maximum protection against ambient light).
Switching of the phototransistor occurs whenever an opaque object passes through the slot and interrupts the
beam.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
Product Photo Here
L Package
W Package
RoHS
Applications:
" Non-contact interruptive object sensing
" Assembly line automation
" Machine automation
" Equipment security
" Machine safety
相關PDF資料 |
PDF描述 |
|---|---|
| MX6SWT-H1-0000-000BA9 | LED XLAMP MX6 WHITE PLCC |
| OPB862T51 | SENS OPTO SLOT 3.18MM TRANS THRU |
| MX6SWT-A1-0000-000EA3 | LED XLAMP MX6 WHITE PLCC |
| OPB862N51 | SENS OPTO SLOT 3.18MM TRANS C-MT |
| MX6SWT-A1-0000-000DA7 | LED XLAMP MX6 WHITE PLCC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| OPB830W | 制造商:OPTEK 制造商全稱:OPTEK 功能描述:Slotted Optical Switches |
| OPB830W_06 | 制造商:OPTEK 制造商全稱:OPTEK 功能描述:Slotted Optical Switches |
| OPB830W11 | 功能描述:光學開關（透射型，光電晶體管輸出） SLOTTED SWITCH RoHS:否 制造商:Omron Electronics 輸出設備:Phototransistor 槽寬:3.4 mm 光圈寬度:0.5 mm 集電極—發射極最大電壓 VCEO:30 V 最大集電極電流:20 mA 正向電流: 安裝風格:Through Hole 最大工作溫度:+ 85 C 最小工作溫度:- 25 C 封裝: |
| OPB830W11Z | 功能描述:光學開關（透射型，光電晶體管輸出） Slotted Opt Switch RoHS:否 制造商:Omron Electronics 輸出設備:Phototransistor 槽寬:3.4 mm 光圈寬度:0.5 mm 集電極—發射極最大電壓 VCEO:30 V 最大集電極電流:20 mA 正向電流: 安裝風格:Through Hole 最大工作溫度:+ 85 C 最小工作溫度:- 25 C 封裝: |
| OPB830W15 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Photo Gap Detector |
發布緊急采購，3分鐘左右您將得到回復。