- 您現在的位置：買賣IC網 > PDF目錄382379 > PCD3310AT (NXP SEMICONDUCTORS) Pulse and DTMF diallers with redial PDF資料下載
參數資料
| 型號： | PCD3310AT |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 無繩電話/電話 |
| 英文描述： | Pulse and DTMF diallers with redial |
| 中文描述： | TELEPHONE DIALER CKT, PDSO28 |
| 文件頁數： | 11/28頁 |
| 文件大小： | 145K |
| 代理商： | PCD3310AT |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁當前第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁
1996 Nov 21
11
Philips Semiconductors
Product specification
Pulse and DTMF diallers with redial
PCD3310; PCD3310A
8.2
Redialling
After CE has risen to V
DD
the oscillator starts running.
The address of the first digit in the redial register is stored
in the RAC, and the device is in the conversation mode.
If ‘R’ is the first keyboard entry the device starts redialling
the contents of the temporary register. If the overflow flag
of the TWAC was set in the previous dialling, the redialling
continues in the main register.
Because access to an external line from a PABX usually
involves dialling an access code and waiting for an access
tone, a ‘one-press’ redial may fail due to insufficient delay
between the access code and the external number.
For this reason, the access code should be redialled. If the
access code (up to 4 digits) matches the first part of the
stored number, then pressing R after the access tone is
obtained will cause the rest of the number to be redialled
(see Fig.7, PABX).
Timing in the DTMF mode is calibrated for both tone bursts
and pauses.
In mixed mode only the first part entered (the pulse dialled
part of the stored number) can be redialled.
During redial keyboard entries (function or non-function)
are not accepted until the device returns to the
conversation mode after completion of redialling. No redial
activity takes place if one of the following events occur:
Power-on reset
Memory clear (‘P’ without subsequent data entry)
Memory overflow (more than 23 valid data entries).
8.3
Notepad
The redial register can also be used as a notepad. In the
conversation mode a number with up to 23 digits can be
entered and stored for redialling. By activating the program
key (P) the WAC and TWAC pointers are reset. This acts
like a memory clear (redial is inhibited). Afterwards, by
entering and storing any digits, redialling will be possible
after flash or hook-on and hook-off (see Fig.9).
During notepad programming the numbers entered will not
be transmitted nor is the mute active, only the confidence
tone is generated.
handbook, full pagewidth
MGE493
5
4
3
2
1
addressed
through pointers
TWAC or RAC
TEMPORARY REGISTER
TEMPORARY WRITE
ADDRESS COUNTER (TWAC)
1
2
3
4
5
6
23
addressed
through pointers
WAC or RAC
MAIN REGISTER
write address counter (WAC)
read address counter (RAC)
ADDRESS COUNTER
Fig.6 Program memory map.
相關PDF資料 |
PDF描述 |
|---|---|
| PCD3310P | Pulse and DTMF diallers with redial |
| PCD3310T | Pulse and DTMF diallers with redial |
| PCD3311 | DTMF/modem/musical-tone generators |
| PCD3311C | DTMF/modem/musical-tone generators |
| PCD3311CP | DTMF/modem/musical-tone generators |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PCD3310ATD | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Tone/Pulse Telephone Dialer |
| PCD3310ATD-T | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Tone/Pulse Telephone Dialer |
| PCD3310FAMILY | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Tone/Pulse Telephone Dialer |
| PCD3310HT | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Tone/Pulse Telephone Dialer |
| PCD3310P | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Pulse and DTMF diallers with redial |
發布緊急采購，3分鐘左右您將得到回復。