- 您現在的位置：買賣IC網 > PDF目錄369959 > PDG-2510 Two Channel Digital Delay Pulse Generator PDF資料下載
參數資料
| 型號： | PDG-2510 |
| 英文描述： | Two Channel Digital Delay Pulse Generator |
| 中文描述： | 雙通道數字延遲脈沖發生器 |
| 文件頁數： | 1/2頁 |
| 文件大小： | 66K |
| 代理商： | PDG-2510 |
THE PULSE OF THE FUTURE
DIRECTED
ENERGY
INCORPORATED
Sync (T0) Plus Two Independent,
Digitally Controlled Outputs
0 to 99.9S Delay and Pulse Width
Ranges With 25ns Resolution
100KHz Maximum Frequency (Internal
Trigger), 5MHz (External Trigger)
Standard RS-232 Computer Interface
Store & Recall Up To 5 System
Configurations
Continuous, Single-Shot, External
Trigger, Burst, Counted Burst, Pulse
Count And Divide-By-N Modes
The PDG-2510 is a precision digital delay and pulse
generator providing two output channels, each with
independently adjustable delay and pulse width, plus a
Sync (T0) output. The accuracy, precision and flexibility of
the PDG-2510 makes it well suited for use in laser timing,
automated testing and precision pulse applications.
The PDG-2510’s Sync (T0) output marks the beginning of
a timing cycle, and is generated by the internal rate
generator or in response to an external trigger. The delay
and pulse width of the two outputs can be set from 0 to
99.9S relative to the T0 trigger with 25 ns resolution on its
highest precision range.
The PDG-2510 can be triggered internally from 1 Hz to
100 KHz with three-digit frequency resolution. External,
single-shot (front panel push-button) and burst mode
triggers are also supported. In external trigger mode, the
maximum trigger frequency is 5MHz.
Operating modes include continuous (pulse generator),
pulse count, divide-by-N, burst and counted burst,
providing flexible control of the pulse outputs. The output
pulse waveforms may be inverted in all operating modes.
Pulse widths can be specified as a time period, or set
based on a duty cycle (ratio of pulse “on” time to “off”
time) for a given frequency.
The PDG-2510 may be operated through its intuitive front
panel controls. For automated applications, complete
control of the generator is provided through the standard
RS232 computer interface. Up to five system
configurations may be stored in internal non-volatile
memory, providing instant recall of frequently-used
configurations.
The PDG-2510’s versatility, ease of use and Sync (T0)
plus two independent outputs make it well suited for a
wide variety of test and measurement tasks. It is also ideal
for laser timing applications, in which the Sync (T0) output
is used to trigger the pulsed laser and set the system’s
repetition frequency. Delayed output 1 controls the laser
Q-Switch, and output 2 can be used to synchronize other
elements in the system, such as a detector or data acqui-
sition hardware.
Operating Modes:
Pulse Generator
Mode
PDG-2510
Two Channel Digital Delay
Pulse Generator
Generates pulses at the rate set by
the internal frequency generator, or
by an external trigger
Pulse Count Mode
Outputs pulses at the rate set by the
internal frequency generator or exter-
nal trigger and stops after N pulses
Divide By N
(Output-2 Mode)
mode, channel 2 pulses every Nth
pulse on channel 1
Burst Mode
Generates a burst of pulses, repeat-
ing at a set interval. Provides user-
control over the number of pulses in
each burst, the frequency of the
pulses within the burst, the delay be-
tween bursts and delay between
burst packets
Counted Burst
Mode
stops after N bursts
Channel 1 operates in continuous
Generates a burst of pulses, and
相關PDF資料 |
PDF描述 |
|---|---|
| PDG-3B-150 | Analog IC |
| PDG-3B-530 | Analog IC |
| PDG-4C-250 | Analog IC |
| PDG-4C-50 | Analog IC |
| PDG-4E-1300 | Analog IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PDG-3B-150 | 制造商:MERRIMAC 制造商全稱:MERRIMAC 功能描述:0 POWER DIVIDERS / COMBINERS |
| PDG-3B-530 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
| PDG-4C-250 | 制造商:MERRIMAC 制造商全稱:MERRIMAC 功能描述:0 POWER DIVIDERS / COMBINERS |
| PDG-4C-50 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
| PDG-4E-1300 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
發布緊急采購，3分鐘左右您將得到回復。