
E
September 1997
Order Number:243328-004
n
Intel Pentium Processor with MMX
Technology 200/233 MHz Mobile Modulewith
internal/bus frequencies of 200/66 MHz and
233/66 MHz
n
512KB Second-level cache of pipeline burst
SRAM
Burst read/write at 3-1-1-1; back-to-back
burst reads at 3-1-1-1-1-1-1-1
Supports up to 64MB of cacheable
system memory (non-PCI memory)
n
Supports ZZ snooze mode power
management
n
Processor core voltage regulation supports
input voltages
5V to 20V at or above 85% peak
efficiency
All CPU and I/O ring voltages supplied
by the module.
n
Thermal transfer plate for heat dissipation
n
Intel 430TX PCIset system controller
DRAM controller supports EDO and
SDRAM at 3.3V
Provides PCI CLKRUN# signal to control
memory clock on the PCI bus
SDRAM clock enable support and self
refresh of EDO or SDRAM during
Suspend mode
Compatible SMRAM (C_SMRAM) and
Extended SMRAM (E_SMRAM) modes of
power management; E_SMRAM mode
supports write-back cacheable SMRAM
up to 1MB
3.3V PCI bus control, Rev 2.1 compliant
n
Active thermal feedback (ATF) sensing
Internal A/D - digital signaling (SMBUS)
across the module interface
Programmable trip point interrupt or poll
mode for reading temperature
The Intel Pentium Processor with MMX technology 200/233MHz Mobile Module is a small, highly integrated
assembly containing an Intel mobile processor and its immediate system-level support. Specifically, the power
supply for the processor's unique voltage requirements, the system Level 2 cache memory and the core logic
required to bridge the processor to the standard system buses are on the module. The module interfaces
electrically to its host system via a 3.3-volt PCI bus, a 3.3-volt memory bus, and 2.5-volt Intel 430TX PCIset
control signals.
INTEL PENTIUM PROCESSOR WITH
MMX TECHNOLOGY MOBILE
MODULE