參數資料
| 型號： | PI7C9X110BNBE |
| 廠商： | Pericom |
| 文件頁數： | 1/1頁 |
| 文件大小： | 0K |
| 描述： | IC PCIE TO PCI REV BRG 160LFBGA |
| 標準包裝： | 189 |
| 應用： | PCI 至 PCI 橋 |
| 接口： | I²C |
| 電源電壓： | 1.8V |
| 封裝/外殼： | 160-LFBGA |
| 供應商設備封裝： | 160-LFBGA（12x12） |
| 包裝： | 托盤 |
| 安裝類型： | 表面貼裝 |
| 產品目錄頁面： | 1227 (CN2011-ZH PDF) |
-
Forward – PCIe primary, PCI secondary
Product:
PCI Express-to-PCI Reversible Bridge
Part Number:
PI7C9X110
Product Description
As one of the leading PCI Express Solution Providers,
Pericom is committed to introducing a line of performance
tuned PCI Express Bridge Products. The PI7C9X110 is
composed of one x1 PCI Express port and one standard 32-
bit / 66MHz PCI port. The versatile PI7C9X110 is capable
of both “forward” and “reverse” bridging. In “forward”
mode, the PI7C9X110 is configured with the PCI Express
port on the primary and the PCI port on the downstream
side. The typical usage in this configuration is to “bridge”
legacy PCI product to PCI Express systems. In “reverse”
mode, the PI7C9X110 is configured with the PCI port on
the primary and the PCI Express port on the downstream
side. The “reverse” configuration will be mainly used to
“bridge” new PCI Express products to legacy PCI systems.
Industry Specifications Compliance
PCI Express Base Specification, Revision 1.0a
PCI Express CEM Specification, Revision 1.0a
PCI Express to PCI/PCI-X Bridge Specification,
Revision 1.0
PCI-to-PCI Bridge Architecture Specification, Revision
1.2
PCI Local Bus Specification, Revision 3.0
PCI Hot-Plug Specification, Revision 1.1
PCI SHPC and Subsystem Specification, Revision 1.0
PCI Mobile Design Guide, Version 1.1
System Management (SM) Bus, Version 2.0
PCI Bus PM Interface Specification, Revision 1.2
Advanced Configuration and Power Interface
Specification, Revision 2.0
PI7C9X110 Topology
PERICOM SEMICONDUCTOR
November 2007 – REVISION 1.4
Page 1 of 1
Special Features
Fully Reversible
-
Reverse – PCI primary, PCIe secondary
Maximum Payload Size – Up to 512 bytes
Transparent and Non-transparent mode
GPIO Support
-
4 dedicated bi-directional
-
When external arbiter is used:
4 additional outputs
4 additional inputs
Masquerade support
-
User defined vendor, device, revision,
subsystem device, and subsystem vendor ID
Large 10KB Buffer
-
6KB for reads & 4KB for writes
Tiny 12 x 12mm, 160-pin LFBGA Package
Industrial Temp (-40°C ~ +85°C)
PCI Express Features
Virtual Isochronous Support
-
Upstream TC 1 – 7 generation
-
Downstream TC 1 – 7 mapping
16-bit CRC, LCRC (32-bit)
ECRC and Advanced Error Reporting
Error Forwarding (Data Poisoning)
Loop back (serial and parallel)
Lane Reversal (Polarity Toggle)
VDDAUX Support (1.8V)
Hot Plug Support
PCI Features
Two Level Internal Arbitration
-
Support for up to 8 bus masters
3.3V Signaling with 5V I/O Tolerance
PME# Support
16-bit Address Decode for VGA
CLKRUN# Support
VAUX Support (3.3V)
Hot Plug Support
Subsystem Device and Subsystem Vendor ID
MSI and INT Support
SM Bus
-
PHY, data link, network layer, PEC, ARP, etc.
I2C Serial EEPROM Support
x1 PCI EXPRESS PORT
32-BIT/66MHz PCI PORT
相關PDF資料 |
PDF描述 |
|---|---|
| PI7C9X130DNDE | IC PCIE-PCIX BRIDGE 1PORT 256BGA |
| PI7C9X20303SLCFDE | IC PCIE PACKET SWITCH 128LQFP |
| PI7C9X20303ULAZPE | IC PCIE PACKET SWITCH 132TQFN |
| PI7C9X20404GPBNBE | IC PCIE PACKET SWITCH 148LFBGA |
| PI7C9X20404SLCFDE | IC PCIE PACKET SWITCH 128LQFP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PI7C9X110BNBEX | 制造商:Pericom Semiconductor Corporation 功能描述: |
| PI7C9X111SL | 制造商:Pericom Semiconductor Corporation 功能描述: |
| PI7C9X111SLBEVBF5 | 制造商:Pericom Semiconductor Corporation 功能描述:PCIE TO PCI REVERSIBLE BRIDGE EVAL BOARD - Boxed Product (Development Kits) |
| PI7C9X111SLBEVBR | 制造商:Pericom Semiconductor Corporation 功能描述:PCIE TO PCI REVERSIBLE BRIDGE EVAL BOARD - Boxed Product (Development Kits) |
| PI7C9X111SLBFDE | 功能描述:外圍驅動器與原件 - PCI PCIe to PCI Bridge RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray |
發布緊急采購，3分鐘左右您將得到回復。