The LPC11U68JBD64E is a 32-bit MICrocontroller based on ARM Cortex-M0+ core with RISC architecture operates at a maximum frequency of 50MHz. The ARM Cortex-M0+ is an easy-to-use, energy-efficient core using a two-stage pipeline and fast single-cycle I/O access. The device incorporates 256kB internal flash, 36kB internal RAM, 4kB EEPROM, two SSP interfaces, PWM/timer subsystem with six configurable multi-purpose timers, 10-channel 12-bit A/D converter with sample rates of up to 2Msps, full speed USB 2.0 device and 48 general-purpose I/O pins. This device also features peripherals like three USARTs and two inter-integrated circuit (I2C).
ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC)
AHB multilayer matrix
System tick timer
Serial wire debug (SWD) and JTAG boundary scan modes supported
Micro trace buffer (MTB) supported
Flash in-application programming (IAP) and In-system programming (ISP
32-bit Integer division routines
Simple DMA engine with 16 channels and programmable input triggers
Pin interrupt and pattern match engine using eight selectable GPIO pins
Two GPIO group interrupt generators
CRC Engine
Windowed watchdog timer (WWDT)
Real-time clock (RTC) in the always-on power domain
USB 2.0 Full-speed device controller with on-chip PHY. XTAL-less low-speed mode supported
12MHz Internal RC oscillator trimmed to 1 % accuracy
32kHz On-chip oscillator for RTC
Crystal oscillator with an operating range of 1MHz to 25MHz
Programmable watchdog oscillator with a frequency range of 9.4kHz to 2.3MHz
PLL allows CPU operation up to the maximum CPU rate
Second, dedicated PLL is provided for USB
應用
計量, 通信與網絡, 消費電子產品, 車用, 醫用, 計算機和計算機周邊