
Electronic control gear
QUICKTRONIC DIMMABLE for FH-lamps, single-lamp version
QT-FH 1x14/230-240 DIM
Page 1
h
b
h
l
b
a
L
N
L
1
2
3
4
-+
Reference :
Mains voltage [V] :
QT-FH 1x14/230-240 DIM
for lamp :
1x FH 14 W
230/240
Permissible voltage fluctuations
[V] :
198 - 264
Permissible battery voltage [V] :
Mains frequency [Hz] :
176 - 254
Lamp start :
Warm start within 2 s
0/50 - 60
Operating frequency [kHz] :
approx. 40 at 100% luminous flux,
approx. 100 at 3% luminous flux
Mains current [A] :
System wattage [W] :
Temperature range [°C] :
0,09
Power factor [c] :
0,95
18
Luminous flux [lm] :
1350
+5 - +50
Radio interference suppression :
to DIN VDE 0875/CISPR 15/EN
55015
Harmonics :
to DIN VDE 0712 Part 23/IEC
929/IEC 555-2/EN 60929
Immunity :
to EN 61547
Length l [mm] :
Height h [mm] :
Standard pack [pcs] :
359
Width b [mm] :
30
30
Distance between holes a [mm] :
350
12
Weight [g] :
310
QUICKTRONIC DIMMABLE for FH/FQ lamps
This electronic high-frequency control gear enables FH and FQ lamps to be dimmed from 100% to 3% (1%) luminous flux via a 1 - 10V DC control line.
The 1-10 V control line allows a wide variety of possible connections, ranging from simple manual control units for small systems through daylight-controlled
regulation systems to modern energy management systems with PC and digital I-Bus technology. QUICKTRONIC DIMMABLE goes beyond all current
conventional and electronic solutions not just in terms of lighting comfort and energy consumption, but also in simplicity of operation and installation.
Comfort:
- Dimmable from 100% to 3% luminous flux for FH lamps
- Dimmable from 100% to 1% luminous flux for FQ lamps
- Flicker-free starting at all dimmer settings
- Numerous control options with a low-voltage control signal (1 - 10 V)
- Electronic control gear from different circuits can be dimmed together on different phases