- 您現在的位置：買賣IC網 > PDF目錄376303 > RC1608J100AS (Electronic Theatre Controls, Inc.) Circular Connector; MIL SPEC:MIL-DTL-38999 Series III; Body Material:Metal; Series:TVP00; Number of Contacts:12; Connector Shell Size:15; Connecting Termination:Crimp; Circular Shell Style:Wall Mount Receptacle; Body Style:Straight PDF資料下載
參數資料
| 型號： | RC1608J100AS |
| 廠商： | Electronic Theatre Controls, Inc. |
| 元件分類： | 圓形連接器 |
| 英文描述： | Circular Connector; MIL SPEC:MIL-DTL-38999 Series III; Body Material:Metal; Series:TVP00; Number of Contacts:12; Connector Shell Size:15; Connecting Termination:Crimp; Circular Shell Style:Wall Mount Receptacle; Body Style:Straight |
| 中文描述： | 貼片電阻 |
| 文件頁數： | 9/12頁 |
| 文件大小： | 167K |
| 代理商： | RC1608J100AS |
12
Coverage :
95% each termination.
Visual : No crack of termination parts and
ceramic exposure of surface by melting
After immersing in flux. dip into the 235
5
molten
solder for 2
0.5 sec
Solder : S63A(KSD 6704)
Flux : ROSIN(KSM 2951)
Flux is the composition of ROSIN and the methanol Weight
rate of ROSIN is about 25%
After soldering resistor on the
PCB, 3mm of bending shall
be applied for 10 sec.
Material of PCB : Glass Epoxy
Thickness : 1.6mm
Measure resistance during load application
pull Direction fixed 0.4 lead
Solderability
Bending Test
|
R :
(0.5%+0.05
) of the initial value
Visual : No evidence of mechanical damage.
Terminal Strenght
Load pull :
0.5kg
1005(1/16W), 1608(1/16W)
0.3kg
|
R :
(1%+0.05
) of the initial value
Visual : No evidence of mechanical damage.
Terminal Strenght
Anti-Vibration Test
|
R :
(1%+0.05
) of the initial value
Visual : No evidence of mechanical damage.
Immerse in molten solder at 260
5
for 10
1 sec.
Preheat and soldering Procedure
Temperature(
)
Time(sec)
80 - 100
150 - 180
260 + 5
150 - 180
80 - 100
60
2 hours each in X, Y, and Z axis(toyal 6 hours) 10 to
55 Hz sweep in 1 minute ampiltude.
Item
Specification
Test Method
CHARACTERISTICS PERFORMANCE
ELECTRICAL CHARACTERISTICS
Item
MECHANICAL CHARACTERISTICS
5)*$, '*-. $)*1 3&4*45034
Direct Current
Resistance
Within the regulated resistance tolerance.
Jumper chip
50
1
R 10:+300ppm/
-200ppm/
10
R 1M:
100ppm/
1M
R
10M:
300ppm/
|
R :
(1%+0.1
) of the initial value
Visual : No evidence of mechanical damage
Jumper chip :
50
|
R :
(3%+0.1
) of the initial value
Visual : No evidence of mechanical damage
Jumper chip :
50
Apply 2.5 times rated voltage for 5sec.
Wait 30 minutes at room temperature and measure the
resistance value.
Perform 10,000 cycles at 2.5 times RCW or the Max.
over load voltage
ON(2.5 times rated volage) : 1 sec
OFF : 25 sec
Have stabilization time of 30 minutes without loading
and measure resistance.
No evidence of mechanical damage.
Apply AC 500V for 1 minute.
1005(1/16W), 1608(1/16W):Apply AC 100V for 1 minute
Apply DC 500V for 1 minute.
1005(1/16W), 1608(1/16W):Apply DC 100V for 1 minute
Over the 1000
Test temperature(
) (20)
a
(-55)
a
(20)
a
(125)
a
(20)
T.C.R(ppm/
) = (R-Ro)/Ro
1/(T-To)
10
6
T = 20(
)
T = Test temperature(
)
Ro = Resistance at room temperature(
)
R = Resistance at T(
)
Applying time:within 5 sec
T.C.R(Resistance
Temperature
Characteristic)
Short-time Overload
Intermittent
Overload
Dielectric withstand-
ing Voltage
Insulation Resistance
Specification
Test Method
Resistance range(
)
R 100
100
R 1K
1K
R 10K
10K
R 100K
100K
R 1M
1M
R
Max test voltage(V)
0.3
1.0
3
10
25
50
à
à
à
à
à
à
à
Solder : S63A(SSD 6704)
Flux : The composition of ROSIN
(KSM295)25% and methanol
(KSM 1658)75%
120
120
10
60
相關PDF資料 |
PDF描述 |
|---|---|
| RC1608J100BS | Circular Connector; MIL SPEC:MIL-DTL-38999 Series III; Body Material:Metal; Series:TVP00; No. of Contacts:12; Connector Shell Size:15; Connecting Termination:Crimp; Circular Shell Style:Wall Mount Receptacle; Body Style:Straight |
| RC1608J100CS | THICK FILM CHIP RESISTORS |
| RC3216G100BS | CONNECTOR ACCESSORY |
| RC3216G100CS | CONNECTOR ACCESSORY |
| RC3216G100ES | CONNECTOR ACCESSORY |
相關代理商/技術參數 |
參數描述 |
|---|---|
| RC1608J100BS | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:THICK FILM CHIP RESISTORS |
| RC1608J100CS | 制造商:Samsung Electro-Mechanics 功能描述:RES THKFLM 0603 10 OHM ?5% 1/10W SMD - Tape and Reel 制造商:Samsung Semiconductor 功能描述: 制造商:Samsung Electro-Mechanics 功能描述:RES 10 OHM 1/10W 5% 0603 制造商:Samsung Semiconductor 功能描述:SMT THICK FILM CHIP RESISTOR 0603 Case 10 OHMS 5% Tolerance 200 PPM |
| RC1608J100ES | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:THICK FILM CHIP RESISTORS |
| RC1608J101AS | 制造商:Samsung Electro-Mechanics 功能描述: |
| RC1608J101CS | 制造商:Samsung Electro-Mechanics 功能描述:Res Thick Film 0603 100 Ohm 5% 1/10W ±100ppm/°C Molded SMD T/R 制造商:Samsung Electro-Mechanics 功能描述:RES THKFLM 0603 100 OHM ?5% 1/10W SMD - Tape and Reel 制造商:SAMSUNG ELECTRO-MECHANICS AMERICA, INC 功能描述:RES 100 OHM 1/10W 5% 0603 制造商:SAMSUNG 功能描述:SMT THICK FILM CHIP RESISTOR 0603 Case 100 OHMS 5% Tolerance 200 PPM |
發布緊急采購，3分鐘左右您將得到回復。