- 您現在的位置：買賣IC網 > PDF目錄26850 > S112S01 (SHARP ELECTRONICS CORP) TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX PDF資料下載
參數資料
| 型號： | S112S01 |
| 廠商： | SHARP ELECTRONICS CORP |
| 元件分類： | 繼電器，輸入/輸出模塊 |
| 英文描述： | TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX |
| 封裝： | PLASTIC, SIP-4 |
| 文件頁數： | 13/13頁 |
| 文件大小： | 240K |
| 代理商： | S112S01 |
9
S112S01 Series
S212S01 Series
For additional design assistance, please review our corresponding Optoelectronic Application Notes.
● Standard Circuit
Tr1
R1
D1
V1
+VCC
AC Line
Load
ZS
ZS : Surge absorption circuit (Snubber circuit)
SSR
3
4
2
1
S112S01
S212S01
Sheet No.: D4-A02501EN
● Degradation
In general, the emission of the IRED used in SSR will degrade over time.
In the case where long term operation and / or constant extreme temperature fluctuations will be applied to
the devices, please allow for a worst case scenario of 50% degradation over 5years.
Therefore in order to maintain proper operation, a design implementing these SSRs should provide at least
twice the minimum required triggering current from initial operation.
Silicone grease to be used is as follows;
1) There is no aged deterioration within the operating temperature ranges.
2) Base oil of grease is hardly separated and is hardly permeated in the device.
3) Even if base oil is separated and permeated in the device, it should not degrade the function of a device.
Recommended grease : G-746 (Shin-Etsu Chemical Co., Ltd.)
: G-747 (Shin-Etsu Chemical Co., Ltd.)
: SC102 (Dow Corning Toray Silicone Co., Ltd.)
In case the optional heat sink is screwed up, please solder after screwed.
In case of the lead frame bending, please keep the following minimum distance and avoid any mechanical
stress between the base of terminals and the molding resin.
Some of AC electromagnetic counters or solenoids have built-in rectifier such as the diode.
In this case, please use the device carefully since the load current waveform becomes similar with rectangu-
lar waveform and this results may not make a device turn off.
4.4mm MIN.
相關PDF資料 |
PDF描述 |
|---|---|
| S112S02 | TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX |
| S212S02 | TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX |
| S11MD5TS | 1 CHANNEL TRIAC OUTPUT OPTOCOUPLER |
| S11MD5VP | 1 CHANNEL TRIAC OUTPUT OPTOCOUPLER |
| S1223-01 | PIN PHOTO DIODE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| S112S01F | 功能描述:固態繼電器-PCB安裝 4-SIP NON-ZC 8mA RoHS:否 制造商:Omron Electronics 控制電壓范圍: 負載電壓額定值:40 V 負載電流額定值:120 mA 觸點形式:1 Form A (SPST-NO) 輸出設備:MOSFET 封裝 / 箱體:USOP-4 安裝風格:SMD/SMT |
| S112S02 | 制造商:SHARP 制造商全稱:Sharp Electrionic Components 功能描述:SIP Type SSR for Medium Power Control |
| S112WW/R | 制造商:Brady Corporation 功能描述:SIGN FIRE EXIT KEEP CLEAR 300X600 制造商:Brady Corporation 功能描述:SIGN, FIRE EXIT KEEP CLEAR, 300X600 |
| S112WW/S | 制造商:Brady Corporation 功能描述:SIGN FIRE EXIT KEEP CLEAR 300X600 制造商:Brady Corporation 功能描述:SIGN, FIRE EXIT KEEP CLEAR, 300X600 |
| S113 | 制造商:DFX 功能描述:STRIPLIGHT LED 600MM COLD PEARL |
發布緊急采購，3分鐘左右您將得到回復。