- 您現在的位置：買賣IC網 > PDF目錄299877 > S1D13503F00A 1024 X 768 PIXELS CRT OR FLAT PNL GRPH DSPL CTLR, PQFP100 PDF資料下載
參數資料
| 型號： | S1D13503F00A |
| 元件分類： | 顯示控制器 |
| 英文描述： | 1024 X 768 PIXELS CRT OR FLAT PNL GRPH DSPL CTLR, PQFP100 |
| 封裝： | QFP-100 |
| 文件頁數： | 1/20頁 |
| 文件大小： | 144K |
| 代理商： | S1D13503F00A |
1
PF885-05
S1D13503 Series
Dot Matrix Graphics LCD Controller
s DESCRIPTION
This device is designed for products where low cost, low power consumption, and low component count are
the major design considerations. This chip operates from 2.7 Volts to 5.5 Volts and up to 25 MHz to suit
different power consumption, speed and cost requirements. The S1D13503 offers a flexible microprocessor
interface and is pin compatible with the SED1352.
The S1D13503 is capable of displaying a maximum of 16 levels of gray shade or 256 simultaneous colors. In
gray shade modes, a 16 x 4 Look-Up Table is provided to allow remapping of the 16 possible gray shades
displayed on the LCD panel. In color modes, three 16 x 4 Look-Up Tables are provided to allow remapping of
the 4096 possible colors displayed on the LCD panel. The S1D13503 can interface to an MC68000 family
microprocessor or an 8/16-bit MPU/Bus with minimum external "glue" logic. This device can directly control
up to 128K bytes of static RAM with a 16-bit data path, or up to 64K bytes with an 8-bit data path.
s FEATURES
x Technology
low power CMOS
2.7 to 5.5 volt operation
S1D13503F00A is 100 pin QFP5-S2 surface
mount package
S1D13503F01A is 100 pin QFP15-STD surface
mount package
S1D13503D00A is Die form
x System
maximum 25 MHz input clock (or pixel clock)
2-terminal crystal input for internal oscillator or
direct connection to external clock source
maximum 16 MHz, 16-bit MC68000 MPU
interface
8-bit or 16-bit MPU/Bus interface with memory
accesses controlled by a READY (or WAIT#)
signal
option to use built-in index register or direct-
mapping to access one of sixteen internal
registers
8-bit or 16-bit SRAM data bus interface
configurations
display memory configurations:
- 128K bytes using one 64K x 16 SRAM
- 128K bytes using two 64K x 8 SRAMs
- 64K bytes using two 32K x 8 SRAMs
- 40K bytes using one 8K x 8 and one
32K x 8 SRAM
- 32K bytes using one 32K x 8 SRAM
- 16K bytes using two 8K x 8 SRAMs
- 8K bytes using one 8K x 8 SRAM
x Display Modes
1 bit-per-pixel, black-and-white display mode
2/4 bits-per-pixel, 4/16 level gray shade display
modes
2/4/8 bits-per-pixel, 4/16/256 level color display
modes
one 16 x 4 Look-Up Table provided for gray shade
display modes
three 16 x 4 Look-Up Tables provided for color
display modes
maximum 16 shades of gray
maximum 256 simultaneous colors from a
possible 4096 colors
split screen display mode (see AUX[0A])
virtual display mode (see AUX[0D])
Note: 256 color display mode support requires a
16-bit display memory interface.
x Display Support
example resolutions:
- 1024 x 768 black-and-white
- 640 x 480 with 4 colors/grays
- 640 x 400 with 16 colors/grays
- 320 x 240 with 256 colors
passive monochrome LCD panels:
- 4-bit single (4-bit data transfer)
- 8-bit single (8-bit data transfer)
- 8-bit dual (4-bit data transfer for each half panel)
passive color LCD panels:
- 4-bit single (4-bit data transfer)
- 8-bit single (8-bit data transfer)
- 8-bit dual (4-bit data transfer for each half panel)
- 16-bit single (8-bit data transfer with external
circuit)
- 16-bit dual (8-bit data transfer with external
circuit)
x Power Management
two software power-save modes
low power consumption
panel power control switch (see AUX[01] bit 4)
相關PDF資料 |
PDF描述 |
|---|---|
| S1DGPC | SLIDE SWITCH, SPDT, LATCHED, 0.05A, 48VDC, THROUGH HOLE-STRAIGHT |
| S1F | 1.2 A, 50 V, SCR, TO-92 |
| S2A | 1.5 A, 100 V, SCR, TO-92 |
| S2D | 1.5 A, 400 V, SCR, TO-92 |
| S2M | 1.5 A, 600 V, SCR, TO-92 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| S1D13503F00A1 | 制造商:Epson Electronics America Inc 功能描述: |
| S1D13503F00A100 | 制造商:Epson Electronics America Inc 功能描述:LCD DRVR 3V/3.3V/5V 80-Pin TQFP |
| S1D13503F00A200 | 功能描述:LCD 驅動器 LCD CONTROLLER RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube |
| S1D13503F01A | 制造商:EPSON 制造商全稱:EPSON 功能描述:LCD Controller ICs |
| S1D13503F01A200 | 功能描述:LCD 驅動器 LCD CONTROLLER RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。