
PrO
TM
Programmable Clock Oscillator
Technical Data
PrO
TM
S8002 Series
SaRonix
3.3 & 3V, HCMOS, SMD
DS-191 REV C
8.7
Frequency Range:
Description
ACTUAL SIZE
A crystal controlled, HCMOS/TTL com-
patible oscillator with an internal pro-
gramming feature that allows SaRonix to
supply any frequency in the 1 to 90MHz
range. This technology significantly re-
duces lead-times from weeks to days.
The parts are built and stocked un-pro-
grammed then programmed by SaRonix
to the frequency required by the cus-
tomer before final test and marking. The
parts exhibit the same low power, precise
rise and fall times, tight symmetry and
HCMOS drive capability as conventional
SaRonix SMD oscillators. The parts fea-
ture tri-state enable or standby control on
pin 1. The packages are fully compatible
with standard SO-J-20 footprints.
1MHz to 90MHz
Frequency Stability:
±25*, ±50 or ±100 ppm over all conditions: calibration tolerance,
operating temperature, input voltage change, load change, aging,
shock and vibration.
Temperature Range:
Operating:
Storage:
-20 to +70°C or -40 to +85°C
-55 to +125°C
Supply Voltage:
Recommended Operating:
3.3V ±10% or 3V ±10% (1 to 50MHz only)
Supply Current:
25mA from 1 to 50MHz, 30mA from 50+ to 90MHz
Output Drive:
Applications & Features
Quick delivery - days instead of weeks
for any frequency - standard or not -
between 1 and 90MHz.
Suited for use with new HCMOS
MPU's.
Tri-State output or standby mode
High Drive HCMOS capability
Stabilities of ±25, ±50, ±100ppm
EIA standard SO-J-20 footprint
Fully compatible with the Epson
SG-8002JA Series configurations.
Other SaRonix products with com-
patible electrical and mechanical
specifications are available, please
see data sheets for the ST410H or
NTH/NTT H.
Symmetry:
-20 to +70°C:
-40 to +85°C:
Rise & Fall Times:
5ns max 20% to 80% V
DD
0.4V max
V
DD
-0.4V min
30pF max 1 to 50MHz, 15pF max 50+ to 90MHz @ 3.3V
15pF max @ 3V
42ps max 33+ to 90 MHz
92ps max 5+ to 33 MHz
167ps max 1 to 5 MHz
Logic 0:
Logic 1:
Load:
Period Jitter RMS:
Mechanical:
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 2004, Condition B2
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition I or J
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
Thermal Shock:
Moisture Resistance:
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Part Numbering Guide
S8002 H S C B – 90.0000
Series
SaRonix Programmable Oscillator
Package
Plastic J-lead
Stability Tolerance
*
A = ±25ppm, -20 to +70°C
B = ±50ppm, -20 to +70°C
C= ±100ppm, -20 to +70°C
E = ±50ppm, -40 to +85°C
F = ±100ppm, -40 to +85°C
P = Output Enable
S = Standby
Frequency
Example PN: S8002HSCB - 90.0000
@ 50% V
DD
HCMOS (3.3V)
1 to 50MHz
45/55%
40/60%
@ 50% V
DD
HCMOS (3.3V)
50+ to 90MHz
40/60%
40/60%
Type
C = 3.3V, 1 to 90 MHz
D = 3.0V, 1 to 50 MHz
*±25ppm is only available at certain frequencies, please contact SaRonix
@ 50% V
DD
HCMOS (3V)
1 to 50MHz
40/60%
40/60%
50μA max (use option S, see part number builder)
Standby Current:
SaRonix
141 Jefferson Drive Menlo Park CA 94025 USA 650-470-7700 800-227-8974 Fax 650-462-9894