- 您現在的位置：買賣IC網 > PDF目錄384910 > SFME120-461 (CRANE ELECTRONICS INC) EMI INPUT FILTER 120 VOLT INPUT PDF資料下載
參數資料
| 型號： | SFME120-461 |
| 廠商： | CRANE ELECTRONICS INC |
| 元件分類： | 數據傳輸濾波器 |
| 英文描述： | EMI INPUT FILTER 120 VOLT INPUT |
| 中文描述： | 1 FUNCTIONS, 120 V, DATA LINE FILTER MODULE |
| 文件頁數： | 1/5頁 |
| 文件大小： | 59K |
| 代理商： | SFME120-461 |
MODEL
B1-12
EMI I
NPUT
F
ILTER
120 V
OLT
I
NPUT
SFME120-461
EMI FILTER 2.1
AMP
DESCRIPTION
The SFME120-461 EMI filter modules are specifically designed to
reduce the reflected input ripple current of Interpoint’s high
frequency DC/DC converters. SFME120-461 filters minimize elec-
tromagnetic interference (EMI) for Interpoint’s SMHP120 Series of
converters. These filters are intended for use in 120 volt applica-
tions which must meet MIL-STD-461 levels of conducted emis-
sions. One filter can be used with multiple converters up to the rated
throughput current of the filter.
S
CREENING AND
R
EPORTS
The SFME120-461 filter offers three screening options – Standard,
Class H, or Class K. See Section C2, Quality Assurance, pages C2-
7 through C2-9, for descriptions. Detailed reports on product
performance are also available and are listed on page C2-9.
I
NPUT
R
IPPLE AND
EMI
Switching DC/DC converters naturally generate two noise compo-
nents on the power input line: differential noise and common mode
noise. Input ripple current refers to both of these components.
Differential noise occurs between the positive input and input
common. Most Interpoint converters have an input filter that reduces
differential noise which is sufficient for most applications.
Common mode noise occurs across stray capacitances between
the converter’s power train components and the baseplate (bottom
of the package) of the converter.
Where low noise currents are required to meet CE03 of MIL-STD-
461, a power line filter is needed. The SFME120-461 EMI power line
filter reduces the common mode and differential noise generated by
the converters. SFME120-461 filters reduce input ripple current by
as much as 60 dB at 500 kHz and 55 dB at 1 MHz when used in
conjunction with Interpoint’s DC/DC converters.
The filter must be placed as close as possible to the converter for
optimum performance. The baseplates of the filter and the converter
should be connected with the shortest and widest possible conduc-
tors. For the best connection, mount the filter’s and converter’s
baseplates on or above a small ground plane.
O
PERATION OVER
T
EMPERATURE
SFME120-461 filters are rated for full power operation from –55°C
to +125°C case temperature. Current is derated linearly to zero at
+135°C case temperature.
I
NSERTION
L
OSS
The maximum dc insertion loss at full load and nominal input voltage
represents a power loss of less than 4%.
P
ACKAGING
SFME120-461 filters are sealed in metal hermetic side-leaded pack-
ages (see Section B8, cases U2, V, W, Y, and Z). Additionally the
FMD28-461 filter is available in a metal hermetic down-leaded
package (see Section B8, case J4).
For more information, contact your Interpoint representative
listed in Section A5.
F
EATURES
Fully qualified to Class H or K
Passive components for
maximum tolerance in space
environments
–55° to +125°C operation
120 volt input
Up to 2.1 amps of
throughput current
Up to 60 dB attenuation
at 500 kHz.
Compliant to
MIL-STD-461C, CE03
Compatible with
MIL-STD-704E
DC power bus
Size (max.): 3.005 x 1.505 x 0.400 inches (76.33 x 38.23 x 10.16mm)
See Section B8, case U1, for dimensions.
Weight:
110 grams maximum
Screening:
Standard, Class H, or Class K (MIL-PRF-38534)
See Section C2 for screening options, see Section A5 for
ordering information.
SFME120-461
2.1 amp
All technical information is believed to be accurate, but no responsibility is assumed
for errors or omissions. Interpoint reserves the right to make changes in products
or specifications without notice. SFME120-461 is a trademark of Interpoint.
Copyright 1999 Interpoint. All rights reserved.
相關PDF資料 |
PDF描述 |
|---|---|
| SFP161 | CURRENT 16.0 AMPERES VOLTAGE 50 TO 600 VOLTS |
| SFP162 | CURRENT 16.0 AMPERES VOLTAGE 50 TO 600 VOLTS |
| SFP163 | CURRENT 16.0 AMPERES VOLTAGE 50 TO 600 VOLTS |
| SFP164 | CURRENT 16.0 AMPERES VOLTAGE 50 TO 600 VOLTS |
| SFP165 | CURRENT 16.0 AMPERES VOLTAGE 50 TO 600 VOLTS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SFME28-461 | 制造商:CRANE 制造商全稱:CRANE 功能描述:EMI INPUT FILTER 28 VOLT INPUT |
| SFMF-6C | 制造商:Procond Oy 功能描述:6 AMP H.PER RFI FILTER |
| SFMG520-31A | 制造商:Panasonic Industrial Company 功能描述:FRAME |
| SFMGQ20-01 | 制造商:Panasonic Industrial Company 功能描述:SHIELD |
| SFMH-104-02-L-D-LC | 制造商:Samtec Inc 功能描述:CONN SCKT STRP SKT 8 POS 0.64MM SLDR RA SMD - Bulk |
發布緊急采購，3分鐘左右您將得到回復。