- 您現在的位置：買賣IC網 > Datasheet目錄21 > SMLZ13WBDCW1 (Rohm Semiconductor)LED WHITE 5V 30MA 115MA 2PLCC Datasheet資料下載
參數資料
| 型號： | SMLZ13WBDCW1 |
| 廠商： | Rohm Semiconductor |
| 文件頁數： | 9/11頁 |
| 文件大小： | 724K |
| 描述： | LED WHITE 5V 30MA 115MA 2PLCC |
| 標準包裝： | 2,000 |
| 顏色： | 冷白色 |
| Millicandela 等級： | 1400mcd |
| 正向電壓： | 3.2V |
| 電流 - 測試： | 20mA |
| 波長 - 主： | 8300K |
| 透鏡類型： | 散射，白色 |
| 透鏡樣式/尺寸： | 圓形，帶平頂，2.4mm |
| 封裝/外殼： | 2-PLCC |
| 尺寸/尺寸： | 3.50mm L x 2.80mm W |
| 高度： | 1.90mm |
| 安裝類型： | 表面貼裝 |
| 包裝： | 帶卷 (TR) |
www.rohm.com
?2013 ROHM Co., Ltd. All rights reserved.
Data Sheet
SML-Z1 series
lAttention Points In Handlin
This product was developed as a surface mount LED especially suitable for reflow soldering.
Please take care of following points when using this device.
1.DESIGNING OF PCB
As for a recommendable solder pattern, Please refer to Fig-1.
The size and direction of the pad pattern
depends on the condition of the PCB,
So, please investigate about the adjustment
thoroughly before designing.
.SOLDERING Sn-Cu Sn-A -Cu Sn-A -Bi-Cu
LED products do not contain reinforcement
materials such as glass fillers.
herefore thermal stress b solderin reatl
influence its reliability.
The temperature conditions for reflow soldering
should therefore be set up according to the
characteristic of this product. (See Fig-2)
Number of reflow process shall be max 2 times
and these processes shall be performed in a row.
Cooling process to normal temperature shall be required
between first and second soldering process.
.USE OF AUTOMATIC MOUNTING MACHINE
As for this product, the silicone resin is used as encapsulate material and the sealing part on top of LED is soft.
Therefore, please make sure not to apply the pressure upon it, as it might influence reliability.
Moreover, please use the adsorption nozzle when you use the automatic mounting machine so as not to apply
the force directly to this top sealing part.
.HANDLING AFTER MOUNTING
s shown ri ht drawin in case outside force is iven
to the device, stress is concentrated to the jointed part
between mold resin and substrate.
Careful handing is needed as ROHM cannot guarantee the falling
of the device by outside force after mounting.
Min.1 min Max. 40sec
Max.250篊, Within
140 to 180篊
230 to
(Fig-1)
PCB Bonding Direction
2.6mm
1.5mm
1.5mm
1.5mm
(Fig-2)
Soldering
PCB
Emitting Direction
Outside
9/10
2013.08 - Rev.C
相關PDF資料 |
PDF描述 |
|---|---|
| SPR-54MVWF | LED 5MM 563GRN/650RED WHT/DIFF |
| SSF-EX2573GD-TR | LED 2X5MM 565NM GRN DIFF T/R |
| SSF-EX2573GD | LED ANGLED 2X5MM GRNDIFF SIDECUT |
| SSF-EX2573ID-TR | LED 2X5MM 635NM HRED DIFF T/R |
| SSF-EX2573ID | LED 2X5MM 635NM HRED DIFF |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SMLZ13WBDCW1A | 功能描述:標準LED-SMD LED SMD 0.30 0.28 white 1100mcd Typ RoHS:否 制造商:Vishay Semiconductors 封裝 / 箱體:0402 LED 大小:1 mm x 0.5 mm x 0.35 mm 照明顏色:Red 波長/色溫:631 nm 透鏡顏色/類型:Water Clear 正向電流:30 mA 正向電壓:2 V 光強度:54 mcd 顯示角:130 deg 系列:VLMx1500 封裝:Reel |
| SMLZ13WBDDA | 制造商:ROHM 制造商全稱:Rohm 功能描述:High brightness |
| SMLZ13WBDDW | 制造商:ROHM 制造商全稱:Rohm 功能描述:High brightness |
| SMLZ14BGT | 制造商:ROHM 制造商全稱:Rohm 功能描述:High brightness 20/50mA guaranteed specifications PLCC2 package |
| SMLZ14BGTT86 | 制造商:ROHM Semiconductor 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。