
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
200049 Rev. C Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. November 2, 2004
1
SMP1322 Series: Low Resistance Plastic
Packaged PIN Diodes
DATA SHEET
Skyworks offers lead (Pb)-free “environmentally
friendly” packaging that is RoHS compliant
(European Parliament for the Restriction of
Hazardous Substances).
NEW
Features
●
Designed for high performance wireless switch applications
●
RS @ 1 mA 0.8
typical
●
Available lead (Pb)-free MSL-1 @ 250 °C per JEDEC J-STD-020
●
Available in tape and reel packaging
Description
The SMP1322 series of plastic packaged, surface mountable PIN
diodes are designed for high volume switch applications from 10
MHz to beyond 2 GHz. The ultra low resistance of these diodes
(1.5
maximum at 1 mA and 0.5 typical at 10 mA) make the
SMP1322 series particularly suited to low loss PIN diode
switches in battery operated circuits. Available in a selection of
plastic packages and in a variety of configurations including an
ultra low inductance (0.2 nH) SOT-143 (SMP1322-017), the small
footprint SC-79 and the miniature SC-70. In addition, the
SMP1322-016 consists of 2 diodes in a SOT-143 package con-
figured to enable insertion in a quarter-wave T/R switch with no
crossover connections.
Characteristic
Value
Reverse voltage (VR)
50 V
Power dissipation @ 25 °C lead
250 mW
temperature (PD)
Storage temperature (TST)
-65 °C to +150 °C
Operating temperature (TOP)
-65 °C to +150 °C
ESD human body model
Class 1B
Absolute Maximum Ratings
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.