
MSC1379.PDF ISO 9001 CERTIFIED
REV C 10/15/99
8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: (480) 941-6300
Fax: (480) 947-1503
DESCRIPTION (600 watt)
This 16 pin 2 line Bidirectional
LOW CAPACITANCE
array is designed for use
in applications where protection is required at the board level. Providing
protection from voltage transients caused by electrostatic discharge (ESD) as
defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4, and
effects of secondary lighting as stated by IEC 1000-4-5.
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a
peak power of 600 watts for an 10x1000
μ
sec pulse and are designed to be
used for secondary surge protection on telephone lines. This device can be
used in either common or differential mode applications. For example in the
circuit diagram on the following page use: TIP to (A) and (C) to ground, RING
to (B) and (D) to ground for common mode, or TIP to (A) and RING to (C), or
TIP to (B) and RING to (D) for differential mode.
FEATURES
600 watts Peak Pulse Power 10x1000
Protects up through 12 Volt Components
Protects 4 Unidirectional lines or 2 Bidirectional
Lines
Provides electrically isolated protection
SO-16 Packaging
UL 94V-0 Flammability Classification
MAXIMUM RATINGS
Operating Temperatures: -55
0
C to +150
0
C
Storage Temperature: -55
C to +150
C
Peak Pulse Power: 600 Watts (10/1000
μ
sec, Figure 1 and 2)
Pulse Repetition Rate: <.01%
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless otherwise specified
STAND-OFF
VOLTAGE
V
WM
VOLTS
BREAKDOWN
VOLTAGE
V
@10 mA
VOLTS
CLAMPING
VOLTAGE
V
C
@ I
PP
VOLTS
MAXIMUM
LEAKAGE
CURRENT
@V
WM
I
D
μA
PEAK
PULSE
CURRENT
@ 10/1000 μS
I
AMPS
CAPACITANCE
(f=1 MHz)
@0V
C
PER LINE PAIR
pF
PART
NUMBER
DEVICE
MARKING
MAX
MIN
MAX
TYP
TYP
TYP
SMP6LC05
SMP6LC5.0
5.0
6.0
9.6
300
10
30
SMP6LC6.5
SMP6LC6.5
6.5
7.22
12.4
300
10
30
SMP6LC12
SMP6LC12
12.0
13.3
19.9
2.0
10
30
NOTE:
Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage V
. Product
selected voltage should be equal to or greater than the continuous or peak operating voltage of the circuit to be
protected.
Application:
The SMP6LCXX product is designed for transient voltage suppression protection of components at the
board level. It is an ideal product to be used for protection of HIGH SPEED I/O TRANSCEIVERS.
SMP6LC5.0
Thru
SMP6LC12
TVSarray
Series
MECHANICAL
Molded SO-16 Surface Mount
Weight: 0.128 grams (approximate)
Body Marked with Logo, and device number
Pin #1 defined by DOT on top of package
PACKAGING
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500 pieces (OPTIONAL
Carrier tubes 50 pcs per (STANDARD)