- 您現在的位置：買賣IC網 > PDF目錄2110 > SSTUAF32866CHLF (IDT, Integrated Device Technology Inc)IC REGIST BUFF 25BIT DDR2 96-BGA PDF資料下載
參數資料
| 型號： | SSTUAF32866CHLF |
| 廠商： | IDT, Integrated Device Technology Inc |
| 文件頁數： | 1/30頁 |
| 文件大小： | 0K |
| 描述： | IC REGIST BUFF 25BIT DDR2 96-BGA |
| 標準包裝： | 270 |
| 邏輯類型： | 1:2 可配置寄存緩沖器 |
| 電源電壓： | 1.7 V ~ 1.9 V |
| 位數： | 25，14 |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 96-LFBGA |
| 供應商設備封裝： | 96-CABGA（13.5x5.5） |
| 包裝： | 托盤 |
當前第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁
DATASHEET
25-BIT CONFIGURABLE REGISTERED BUFFER FOR DDR2
ICSSSTUAF32866C
25-BIT CONFIGURABLE REGISTERED BUFFER FOR DDR2
1
ICSSSTUAF32866C
7100/12
Description
This 25-bit 1:1 or 14-bit 1:2 configurable registered buffer is
designed for 1.7-V to 1.9-V VDD operation.
All clock and data inputs are compatible with the JEDEC
standard for SSTL_18. The control inputs are LVCMOS. All
outputs are 1.8-V CMOS drivers that have been optimized
to drive the DDR-II DIMM load. ICSSSTUAF32866C
operates from a differential clock (CLK and CLK). Data are
registered at the crossing of CLK going high, and CLK
going low.
The C0 input controls the pinout configuration of the 1:2
pinout from A configuration (when low) to B configuration
(when high). The C1 input controls the pinout configuration
from 25-bit 1:1 (when low) to 14-bit 1:2 (when high).
A - Pair Configuration (C01 = 0, C11 = 1 and C02 = 0,
C12 = 1)
Parity that arrives one cycle after the data input to which it
applies is checked on the PAR_IN of the first register. The
second register produces to PPO and QERR signals. The
QERR of the first register is left floating. The valid error
information is latched on the QERR output of the second
register. If an error occurs QERR is latched low for two
cycles or until RESET is low.
B - Single Configuration (C0 = 0, C1 = 0)
The device supports low-power standby operation. When
the RESET input (RESET) is low, the differential input
receivers are disabled, and undriven (floating) data, clock
and reference voltage (VREF) inputs are allowed. In
addition, when RESET is low all registers are reset, and all
outputs are forced low. The LVCMOS RESET and Cn inputs
must always be held at a valid logic high or low level. To
ensure defined outputs from the register before a stable
clock has been supplied, RESET must be held in the low
state during power up.
In the DDR-II RDIMM application, RESET is specified to be
completely asynchronous with respect to CLK and CLK.
Therefore, no timing relationship can be guaranteed
between the two. When entering reset, the register will be
cleared and the outputs will be driven low quickly, relative to
the time to disable the differential input receivers. However,
when coming out of reset, the register will become active
quickly, relative to the time to enable the differential input
receivers. As long as the data inputs are low, and the clock
is stable during the time from the low-to-high transition of
RESET until the input receivers are fully enabled, the
design of the ICSSSTUAF32866C must ensure that the
outputs will remain low, thus ensuring no glitches on the
output.
The device monitors both DCS and CSR inputs and will
gate the Qn outputs from changing states when both DCS
and CSR inputs are high. If either DCS and CSR input is
low, the Qn outputs will function normally. The RESET input
has priority over the DCS and CSR control and will force the
outputs low. If the DCS-control functionality is not desired,
then the CSR input can be hardwired to ground, in which
case, the setup-time requirement for DCS would be the
same as for the other D data inputs. Package options
include 96-ball LFBGA (MO-205CC).
Features
25-bit 1:1 or 14-bit 1:2 registered buffer with parity check
functionality
Supports SSTL_18 JEDEC specification on data inputs
and outputs
Supports LVCMOS switching levels on C0, C1, and
RESET inputs
Low voltage operation: VDD = 1.7V to 1.9V
Drop-in replacement for ICSSSTUA32864
Available in 96-ball BGA package
Applications
DDR2 Memory Modules
Provides complete DDR DIMM solution with
ICS98ULPA877A or IDTCSPUA877A
Ideal for DDR2 400, 533, and 667
相關PDF資料 |
PDF描述 |
|---|---|
| SSTUAF32868AHLF | IC REGIST BUFF 25BIT DDR2 176BGA |
| SSTUAF32868BHLFT | IC REG BUFFER 28BIT DDR2 176BGA |
| SSTUAF32869AHLFT | IC REGIST BUFF 25BIT DDR2 150BGA |
| SSTUB32864AHLF | IC REGIST BUFF 25BIT DDR2 96-BGA |
| SSTUB32866BHLFT | IC REGIST BUFF 25BIT DDR2 96-BGA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SSTUAF32866CHLFT | 功能描述:IC REGIST BUFF 25BIT DDR2 96-BGA RoHS:是 類別:集成電路 (IC) >> 邏輯 - 專用邏輯 系列:- 產品變化通告:Product Discontinuation 25/Apr/2012 標準包裝:1,500 系列:74SSTV 邏輯類型:DDR 的寄存緩沖器 電源電壓:2.3 V ~ 2.7 V 位數:14 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:48-TFSOP（0.240"，6.10mm 寬） 供應商設備封裝:48-TSSOP 包裝:帶卷 (TR) |
| SSTUAF32868AHLF | 功能描述:寄存器 RoHS:否 制造商:NXP Semiconductors 邏輯類型:CMOS 邏輯系列:HC 電路數量:1 最大時鐘頻率:36 MHz 傳播延遲時間: 高電平輸出電流:- 7.8 mA 低電平輸出電流:7.8 mA 電源電壓-最大:6 V 最大工作溫度:+ 125 C 封裝 / 箱體:SOT-38 封裝:Tube |
| SSTUAF32868AHLFT | 功能描述:寄存器 RoHS:否 制造商:NXP Semiconductors 邏輯類型:CMOS 邏輯系列:HC 電路數量:1 最大時鐘頻率:36 MHz 傳播延遲時間: 高電平輸出電流:- 7.8 mA 低電平輸出電流:7.8 mA 電源電壓-最大:6 V 最大工作溫度:+ 125 C 封裝 / 箱體:SOT-38 封裝:Tube |
| SSTUAF32868BHLF | 功能描述:IC REG BUFFER 28BIT DDR2 176BGA RoHS:是 類別:集成電路 (IC) >> 邏輯 - 專用邏輯 系列:- 產品變化通告:Product Discontinuation 25/Apr/2012 標準包裝:1,500 系列:74SSTV 邏輯類型:DDR 的寄存緩沖器 電源電壓:2.3 V ~ 2.7 V 位數:14 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:48-TFSOP（0.240"，6.10mm 寬） 供應商設備封裝:48-TSSOP 包裝:帶卷 (TR) |
| SSTUAF32868BHLFT | 功能描述:IC REG BUFFER 28BIT DDR2 176BGA RoHS:是 類別:集成電路 (IC) >> 邏輯 - 專用邏輯 系列:- 產品變化通告:Product Discontinuation 25/Apr/2012 標準包裝:1,500 系列:74SSTV 邏輯類型:DDR 的寄存緩沖器 電源電壓:2.3 V ~ 2.7 V 位數:14 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:48-TFSOP（0.240"，6.10mm 寬） 供應商設備封裝:48-TSSOP 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。