- 您現在的位置：買賣IC網 > PDF目錄384931 > STF28-461 (Standard Power) EMI INPUT FILTER 28 VOLT INPUT PDF資料下載
參數資料
| 型號： | STF28-461 |
| 廠商： | Standard Power |
| 英文描述： | EMI INPUT FILTER 28 VOLT INPUT |
| 中文描述： | 電磁干擾輸入濾波器28伏的輸入 |
| 文件頁數： | 1/4頁 |
| 文件大小： | 55K |
| 代理商： | STF28-461 |
B1-16
STF28-461
EMI FILTER
0.8 AMP
EMI I
NPUT
F
ILTER
28 V
OLT
I
NPUT
DESCRIPTION
The STF28-461 EMI filter module has been designed as a
companion for Interpoint SMSA flyback power converters. Multiple
SMSA power converters can be operated from a single filter
provided the total power line current does not exceed the filter
maximum rating. The STF filter will reduce the SMSA’s power line
reflected ripple current to within the limit of MIL-STD-461C, Method
CE03, as shown in the example of Figures 4 and 5.
The STF filter is fabricated using thick film hybrid technology and is
sealed in a metal package for space, military, aerospace and other
applications requiring EMI suppression.
S
CREENING AND
R
EPORTS
The STF28-461 filter offers three screening options – Standard,
Class H, or Class K. See Section C2, Quality Assurance, pages C2-
7 through C2-9, for descriptions. Detailed reports on product
performance are also available and are listed on page C2-9.
O
PERATION
The SMSA power converter has an internal capacitor across its
input power terminals. When the SMSA and STF filters are used
together, this capacitor becomes part of the filter and forms its final
LC output section.
The STF filter provides both differential and common mode rejection
bringing DC/DC converters into compliance with MIL-STD-461C
CE03. It is designed to be used with the SMSA, SMHF, and MCH
Series of converters. The STF filter can be used with multiple
converters up to the rated current of the filter.
For more information, contact your Interpoint representative
listed in Section A5.
F
EATURES
Fully qualified to Class H or K
Passive components for
maximum tolerance in space
environments
–55° to +125°C operation
28 volt input
Up to 0.8 amps throughput current
50 dB minimum attenuation
at 500 kHz
Compliant to MIL-STD-461C, CE03
Compatible with MIL-STD-704E
DC power bus
Size (max.): 0.975 x 0.800 x 0.270 (24.77 x 20.32 x 6.86 mm)
See Section B8, cases A1, for dimensions.
Weight:
10.3 grams typical, 11.5 grams maximum
Screening: Standard, Class H, or Class K (MIL-PRF-38534)
See Section C2 for screening options, see
Section A5 for ordering information.
MODEL
STF28-461
0.8 amp
All technical information is believed to be accurate, but no responsibility is
assumed for errors or omissions. Interpoint reserves the right to make changes in
products or specifications without notice. STF28-461 is a trademark of Interpoint.
Copyright 1999 Interpoint. All rights reserved.
相關PDF資料 |
PDF描述 |
|---|---|
| SU-A29BC-FREQ | Frequency Range: 300.0MHz to 1.7GHz |
| SU-A29B0 | Frequency Range: 300.0MHz to 1.7GHz |
| SU-A29B0-FREQ | Frequency Range: 300.0MHz to 1.7GHz |
| SU-A29B1-FREQ | Frequency Range: 300.0MHz to 1.7GHz |
| SU-A29B7-FREQ | Frequency Range: 300.0MHz to 1.7GHz |
相關代理商/技術參數 |
參數描述 |
|---|---|
| STF28-461/HH | 制造商:CRANE 制造商全稱:CRANE 功能描述:STF28-461 EMI Input Filters |
| STF28-461/KH | 制造商:CRANE 制造商全稱:CRANE 功能描述:STF28-461 EMI Input Filters |
| STF28-461HH | 制造商:CRANE 制造商全稱:CRANE 功能描述:STF28-461 EMI Input Filters |
| STF28N60DM2 | 功能描述:MOSFET N-CH 600V 21A 制造商:stmicroelectronics 系列:MDmesh? DM2 包裝:管件 零件狀態:有效 FET 類型:MOSFET N 通道，金屬氧化物 FET 功能:標準 漏源極電壓（Vdss）:600V 電流 - 連續漏極（Id）（25°C 時）:21A（Tc） 不同?Id，Vgs 時的?Rds On（最大值）:160 毫歐 @ 10.5A，10V 不同 Id 時的 Vgs（th）（最大值）:5V @ 250μA 不同 Vgs 時的柵極電荷（Qg）:34nC @ 10V 不同 Vds 時的輸入電容（Ciss）:1500pF @ 100V 功率 - 最大值:30W 工作溫度:-55°C ~ 150°C（TJ） 安裝類型:通孔 封裝/外殼:TO-220-3 整包 供應商器件封裝:TO-220FP 標準包裝:50 |
| STF28N60M2 | 制造商:STMicroelectronics 功能描述:N-channel 600 V, 0.120 Ohm typ., 24 A MDmesh II Plus(TM) low Qg Power MOSFETs in TO-220FP package |
發布緊急采購，3分鐘左右您將得到回復。