產品概述
The SN74HC125PWR is a quadruple Bus Buffer Gate features independent line drivers with 3-state outputs. It is designed for 2 to 6V VCC operation. Each output is disabLED when the associated output-enable (OE) input is high. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
High-current 3-state outputs interface directly with system bus or can drive up to 15 LSTTL loads
80μA maximum ICC low power consumption
11ns typical Propagation delay (tpd)
±6mA Output drive at 5V
1μA maximum Low input current
Green product and no Sb/Br
應用
工業, 建筑自動化, 信號處理, 消費電子產品, 通信與網絡, 計算機和計算機周邊, 計量, 測試與測量
產品信息
邏輯器件類型: 緩沖/線路驅動器、非反相 邏輯系列/標號: 74HC125 封裝類型: TSSOP 針腳數: 14引腳 電源電壓最小值: 2V 電源電壓最大值: 6V 邏輯芯片系列: 74HC 邏輯芯片標號: 74125 工作溫度最小值: -40°C 工作溫度最高值: 85°C 產品范圍: - 汽車質量標準: - MSL: MSL 1 -無限制
免責聲明： 以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責。買賣IC網對此不承擔任何保證責任。
以上是，SN74HC125PWR正品保障公司現貨量大從優SN74HC125PWR，品牌:TI 型號:SN74HC125PWR的信息