| 型號 | CD4053BPWR | 廠家 | TI |
| 批號 | 19+ | 封裝 | TSSOP-16 |
產品概述
The CD4053BPWR is a triple 2-channel Analog Multiplexer having three separate digital control inputs, A, B and C and an inhibit input. Each control input selects one of a pair of channels whICh are connected in a single-pole, double-throw configuration. When these devices are used as demultiplexers, the channel IN/OUT terminals are the outputs and the COMMON OUT/IN terminals are the inputs. The device is digitally-controlLED analog switches having low ON impedance and very low OFF leakage current. These multiplexer circuits dissipate extremely low quiescent power over the full VDD-VSS and VDD-VEE supply-voltage ranges, independent of the logic state of the control signals. When logic 1 is present at the inhibit-input terminal, all channels are off.
125R (typical) Low ON resistance over 15VP-P
18V Signal input range for VDD - VEE
±100pA (Typical) High OFF resistance, channel leakage at VDD-VEE = 18 V
Logic-level conversion for digital addressing signals
Binary address decoding on chip
100% Tested for quiescent current at 20V
1μA Maximum input current at 18V over full package temperature range, 100nA at 18V and 25°C
Break-before-make switching eliminates channel overlap
應用
信號處理, 自動化與過程控制, 消費電子產品, 傳感與儀器
產品信息
多路復用器配置: 2:1 電路數: 3電路 通態電阻最大值: 240ohm 電源電壓范圍: 3V 至 20V 模擬多路復用器外殼: TSSOP 針腳數: 16引腳 工作溫度最小值: -55°C 工作溫度最高值: 125°C 產品范圍: - 汽車質量標準: - MSL: MSL 1 -無限制
免責聲明： 以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責。買賣IC網對此不承擔任何保證責任。
以上是，CD4053BPWR正品保障公司現貨量大從優CD4053BPWR，型號:CD4053BPWR 廠家:TI 批號:19+ 封裝:TSSOP-16的信息