參數資料
| 型號： | SY88149HALMG TR |
| 廠商： | Micrel Inc |
| 文件頁數： | 1/10頁 |
| 文件大小： | 0K |
| 描述： | IC AMP LIMITING 1.25GBPS 16QFN |
| 標準包裝： | 1 |
| 類型： | 限幅后置放大器 |
| 應用： | 光纖學網絡 |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 16-VFQFN 裸露焊盤 |
| 供應商設備封裝： | 16-QFN（3x3） |
| 包裝： | 標準包裝 |
| 其它名稱： | 576-3960-6 |
SY88149HAL
1.25Gbps Burst-Mode Limiting Amplifier
with Ultra-Fast Signal Assert Timing
Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (
408) 944-0800 fax + 1 (408) 474-1000 http://www.micrel.com
July 2011
M9999-072511-A
hbwhelp@micrel.com or (408) 955-1690
General Description
The SY88149HAL is a high-sensitivity, burst-mode
capable, limiting-post amplifier designed for FTTH PON
optical line terminal (OLT) receiver applications. The
SY88149HAL satisfies the strict timing restrictions of the
GPON standards by providing ultra-fast loss-of-signal
(LOS) or signal-detect (SD) output. Auto reset and manual
reset options are provided to control LOS/SD output
timing. The device can be connected to burst-mode
capable transimpedance amplifiers (TIAs) using AC or DC
coupling.
The SY88149HAL generates a high-gain LVTTL LOS or
SD output. A programmable LOS/SD level set pin
(LOS/SDLVL) sets the sensitivity of the input amplitude
detection. For increased flexibility, this device also
includes an option to select between LOS or SD output by
using the LOS/SD SEL pin. The LOS/SD output can be fed
back to the JAM input to maintain data output stability
under an invalid input signal conditions. Typically, 3dB
LOS/SD hysteresis is provided to prevent chattering.
The SY88149HAL operates from a single +3.3V power
supply, over temperatures ranging from –40
oC to +85oC.
With its wide bandwidth and high gain, signals up to
1.25Gbps and as small as 5mVpp can be amplified to
LVPECL levels.
All support documentation can be found on Micrel’s web
site at: www.micrel.com.
Features
<5ns SD Assert (LOS Deassert) time
Option to AUTO RESET or manual RESET LOS/SD
output
Selectable LOS/SD output option
High-sensitivity LOS/SD signal detect
Low-noise LVPECL data outputs
Squelching function to maintain output stability
Programmable LOS/SD level set (LOS/SDLVL)
5mVpp input sensitivity
1.25Gbps operation
Single 3.3V power supply
Available in a 16-pin (3mm × 3mm) QFN package
Applications
GE-PON/GPON
Gigabit Ethernet
Fibre Channel
OC-3/12/24 SONET/SDH
High-gain line driver and line receiver
Low-gain TIA interface
Markets
FTTH PON
Datacom/Telecom
Optical transceiver
相關PDF資料 |
PDF描述 |
|---|---|
| SY88149HLMG TR | IC POST AMP BURST GEPON/GPON 16M |
| SY88149NDLMG | IC LIMITING AMP 1.25GBPS 16QFN |
| SY88289ALMG | IC POST AMP 3.3V 3.2GBPS 16-MLF |
| SY88289CLMG | IC POST AMP 3.3V 3.2GBPS 16-MLF |
| SY88289HLMG TR | IC CML LIMITING AMP 16MLF |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SY88149HL | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:3.3V 1.25Gbps Burst-Mode Limiting |
| SY88149HL_10 | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:3.3V 1.25Gbps Burst-Mode Limiting |
| SY88149HLMG | 功能描述:限幅放大器 Burst-mode post amp with ultra-fast SD assert time for GEPON/GPON OLT (ROHS Compliant) RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| SY88149HLMG TR | 功能描述:限幅放大器 Burst-mode post amp with ultra-fast SD assert time for GEPON/GPON OLT (ROHS Compliant) RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| SY88149HLMGTR | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:3.3V 1.25Gbps Burst-Mode Limiting |
發布緊急采購，3分鐘左右您將得到回復。