
TFS 346a.doc
VI TELEFILTER
version 2.0
10.02.2003
Filter Specification
TFS 346 A
1/5
TELEFILTER GmbH
Potsdamer Strae 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Measurement condition
Ambient temperature
T
A
:
Input power level:
Terminating impedances at fc
*
):
23 °C
0 dBm
input: 472
// -6,6 pF
output: 210
// -4,9 pF
Characteristics
Remark:
Reference level for the relative attenuation
arel
of the
TFS 346A
is the minimum of the pass band attenuation
amin
. The minimum of
the pass band attenuation
amin
is defined as the insertion loss
ae
The centre frequency fc is the arithmetic mean value of the upper and lower
frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The temperature coefficient of frequency Tc
f
is valid for both the
reference frequency fc and the frequency response of the filter in the operating temperature range
.
Data
typ. value
tolerance / limit
Insertion loss
(reference level)
Nominal frequency
Centre frequency
at ambient temperature
Pass band
Amplitude ripple
within PB
ae
9,5 dB
max. 14,5 dB
fN
fc
-
MHz
346
MHz
-
346
PB
-
0,4 dB
fN
±
0,5 MHz
max.
0,8 dB
In band ripple
(in any 112,5 kHz increment within the PB)
Relative attenuation
0,1 dB
max.
0,5 dB p-p
arel
fN
......... fN ±
0,5
MHz
0,4 dB
max. 0,8 dB
fN ± 1,2
fN ± 1,5 MHz ......... fN ± 3
DC
fN + 3
MHz ......... fN + 1,5
Group delay
at
fN
MHz ......... fN ± 1,5
MHz
MHz
MHz
GHz
42
45
55
53
dB
dB
dB
dB
min. 39 dB
min. 40 dB
min. 50 dB
min. 50 dB
......... fN - 3
1,75 μs
max.
2
μs
Group delay ripple
in PB
(in any 112,5 kHz increment within the PB)
Phase linearity
in PB
(in any 112,5 kHz increment within the PB)
Input power level
Operating temperature range
50
ns
max. 120
ns
1,5 deg
max.
5
deg p-p
-
max. 23
dBm**)
-
- 40 °C ... + 70
°C
Storage temperature range
-
- 40 °C ... + 100
°C
Turnover temperature
T
o
20
°C
-
Temperature coefficient of frequency
TC
f
***
- 0,05
ppm / K
2
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.
**) This power level is only allowed for short term operation (10% of the life time), the max. input power for continuous operation is max.15dBm
only
***)
f(Hz) = TCf(ppm/K2) x (T-T
0
)2 x fTo(MHz)
generated:
checked / approved: