
TFS453.doc
VI TELEFILTER
Measurement condition
Ambient temperature:
Input power level:
Terminating impedances at fc
*:
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 453 is the insertion loss. The minimum of the pass band attenuation amin is defined
as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation
level relative to the insertion loss ae. The temperature coefficient of frequency Tc
f
is valid both for the reference frequency fc and the frequency
response of the filter in the operating temperature range
.
D a t a
Insertion loss
at
f
N
(reference level)
Nominal frequency
f
N
version 1.3
28.11.03
Filter specification
TFS 453 1/5
TELEFILTER GmbH
Potsdamer Strae 18
D-14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail:
tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
25
°
C
0 dBm
input:
output: 340
// -5,3 pF
340
// -5,0 pF
typ. value
tolerance / limit
5,3
dB
max.
7
dB
-
453
MHz
Centre frequency
( at ambient temperature)
Passband
f
C
453
MHz
± 0,2 MHz
PB
-
f
c
±
1,6 MHz
Amplitude variation
within PB
Relative attenuation
0,3 dB
max.
1
dB
f
C
f
C
±
... f
C
±
1,6
2,5
MHz
MHz
0,3 dB
1,6 dB
max.
max.
1
3
dB
dB
1,6 MHz .. f
C
±
f
C
±
f
C
±
Group delay ripple
within PB
4,3 MHz ... f
C
±
8
MHz ... f
C
±
8
MHz
MHz
17
37
dB
dB
min.
min.
10
20
dB
dB
50
40
ns
max. 100
ns
Absolute group delay
at f
C
Phase variation
Triple transit suppression
VSWR
Input power level
Temperature coefficient of frequency
( Tc
f
)
0,38 μs
max.
1
μs
within
PB
4,8 deg
max.
6
deg (p-p)
38
dB
min. 35
dB
within PB
16
dB
min.
10
dB
-
max. + 15
dBm
- 18
ppm/K
-
Frequency deviation of fc over temperature T:
Operating temperature range
fc(Hz) = Tc
f
(ppm/K) x (T - T
A
) x f
CAT
(MHz)
- 40 °C... + 85
-
°C
°
C
Storage temperature range
-
- 40 °C... + 85
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
generated
:
checked / approved
: