- 您現在的位置：買賣IC網 > PDF目錄382596 > TL497AI (Texas Instruments, Inc.) SWITCHING VOLTAGE REGULATORS PDF資料下載
參數資料
| 型號： | TL497AI |
| 廠商： | Texas Instruments, Inc. |
| 元件分類： | 基準電壓源/電流源 |
| 英文描述： | SWITCHING VOLTAGE REGULATORS |
| 中文描述： | 開關穩壓器 |
| 文件頁數： | 1/9頁 |
| 文件大小： | 137K |
| 代理商： | TL497AI |
TL497A
SWITCHING VOLTAGE REGULATORS
SLVS009D – JUNE 1976 – REVISED JULY 1999
1
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
High Efficiency . . . 60% or Greater
Output Current . . . 500 mA
Input Current Limit Protection
TTL-Compatible Inhibit
Adjustable Output Voltage
Input Regulation . . . 0.2% Typ
Output Regulation . . . 0.4% Typ
Soft Start-Up Capability
description
The TL497A incorporates all the active functions
required in the construction of switching voltage
regulators. It can also be used as the control
element to drive external components for high-power-output applications. The TL497A was designed for ease
of use in step-up, step-down, or voltage-inversion applications requiring high efficiency.
The TL497A is a fixed-on-time variable-frequency switching-voltage-regulator control circuit. The switch-on
time is programmed by a single external capacitor connected between FREQ CONTROL and GND. This
capacitor, C
T
, is charged by an internal constant-current generator to a predetermined threshold. The charging
current and the threshold vary proportionally with V
CC
. Thus, the switch-on time remains constant over the
specified range of input voltage (4.5 V to 12 V). Typical on times for various values of C
T
are as follows:
TIMING CAPACITOR, CT (pF)
ON TIME (
μ
s)
200
250
350
400
500
750
1000
1500
2000
19
22
26
32
44
56
80
120
180
The output voltage is controlled by an external resistor ladder network (R1 and R2 in Figures 1, 2, and 3) that
provides a feedback voltage to the comparator input. This feedback voltage is compared to the reference
voltage of 1.2 V (relative to SUBSTRATE) by the high-gain comparator. When the output voltage decays below
the value required to maintain 1.2 V at the comparator input, the comparator enables the oscillator circuit, which
charges and discharges C
T
as described above. The internal pass transistor is driven on during the charging
of C
T
. The internal transistor can be used directly for switching currents up to 500 mA. Its collector and emitter
are uncommitted, and it is current driven to allow operation from the positive supply voltage or ground. An
internal Schottky diode matched to the current characteristics of the internal transistor also is available for
blocking or commutating purposes. The TL497A also has on-chip current-limit circuitry that senses the peak
currents in the switching regulator and protects the inductor against saturation and the pass transistor against
overstress. The current limit is adjustable and is programmed by a single sense resistor, R
CL
, connected
between V
CC
and CUR LIM SENS. The current-limit circuitry is activated when 0.7 V is developed across R
CL
.
External gating is provided by the INHIBIT input. When the INHIBIT input is high, the output is turned off.
Simplicity of design is a primary feature of the TL497A. With only six external components (three resistors, two
capacitors, and one inductor), the TL497A operates in numerous voltage-conversion applications (step-up,
step-down, invert) with as much as 85% of the source power delivered to the load. The TL497A replaces the
TL497 in all applications.
The TL497AC is characterized for operation from 0
°
C to 70
°
C. The TL497AI is characterized for operation from
–40
°
C to 85
°
C.
Copyright
1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
5
6
7
14
13
12
11
10
9
8
COMP INPUT
INHIBIT
FREQ CONTROL
SUBSTRATE
GND
CATHODE
ANODE
V
CC
CUR LIM SENS
BASE DRIVE
BASE
COL OUT
NC
EMIT OUT
(TOP VIEW)
D, N, OR PW PACKAGE
NC – No internal connection
BASE (11) and BASE DRIVE (12) are used for device testing
only. They normally are not used in circuit applications of the
device.
相關PDF資料 |
PDF描述 |
|---|---|
| TL497AY | SWITCHING VOLTAGE REGULATORS |
| TL497APW | SWITCHING VOLTAGE REGULATORS |
| TL497 | SWITCHING VOLTAGE REGULATORS |
| TL497AD | SWITCHING VOLTAGE REGULATORS |
| TL497AN | SWITCHING VOLTAGE REGULATORS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TL497AID | 功能描述:直流/直流開關調節器 1.2V Switching V RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5 |
| TL497AIDE4 | 功能描述:直流/直流開關調節器 500-mA Peak S-U S-D Switching Volt Reg RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5 |
| TL497AIDG4 | 功能描述:直流/直流開關調節器 500-mA Inverting Switching Vltg Reg RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5 |
| TL497AIDR | 功能描述:直流/直流開關調節器 1.2V Switching V RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5 |
| TL497AIDRE4 | 功能描述:直流/直流開關調節器 500-mA Peak S-U S-D Switching Volt Reg RoHS:否 制造商:International Rectifier 最大輸入電壓:21 V 開關頻率:1.5 MHz 輸出電壓:0.5 V to 0.86 V 輸出電流:4 A 輸出端數量: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PQFN 4 x 5 |
發布緊急采購，3分鐘左右您將得到回復。