- 您現在的位置：買賣IC網 > PDF目錄98257 > TLV5613CPWRG4 (TEXAS INSTRUMENTS INC) PARALLEL, WORD INPUT LOADING, 1 us SETTLING TIME, 12-BIT DAC, PDSO20 PDF資料下載
參數資料
| 型號： | TLV5613CPWRG4 |
| 廠商： | TEXAS INSTRUMENTS INC |
| 元件分類： | DAC |
| 英文描述： | PARALLEL, WORD INPUT LOADING, 1 us SETTLING TIME, 12-BIT DAC, PDSO20 |
| 封裝： | PLASTIC, TSSOP-20 |
| 文件頁數： | 7/23頁 |
| 文件大小： | 447K |
| 代理商： | TLV5613CPWRG4 |
TLV5613
2.7 V TO 5.5 V 12-BIT PARALLEL DIGITAL-TO-ANALOG CONVERTER
WITH POWER DOWN
SLAS174B – DECEMBER 1997 – REVISED NOVEMBER 2000
15
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
APPLICATION INFORMATION
software
In the following example, the code generates a waveform at 500 KSPS with 500 samples stored in a table within
the program memory space of the microcontroller. The period of the waveform is 1 ms.
The waveform data is located in the program memory space from address 01000h to address 013E8h
(2
× 500 = 1000 = 03E8h) beginning with the MSW of the first 16-bit word (the 4 MSBs are ignored), followed
by the LSW. Two bytes are required for each DAC word (the table is not shown in the code example).
The program consists of two parts:
D A main routine, which is executed after reset and which initializes the timer and the interrupt system of the
microcontroller.
D An interrupt service routine, which reads a new value from the waveform table and writes it to the DAC.
This example uses timer 0 in mode 3 (8-bit timer with auto reload). The clock of the timer is derived from the
system clock and has a frequency of fosc/12. The timer overrun frequency ftim is given by the following equation:
f
tim +
f
OSC
12(256–Reload)
and the reload value is given by Reload
+ 256–
f
OSC
12 f
tim
To get a timer overrun frequency of 500 kHz at a system clock of 24 MHz, the reload value is:
Reload
+ 256 –
24
12
0.5
+ 256–4 + 252 + 0FCh
With this value, the timer generates an interrupt every 2
s. The corresponding service routine T0_isr reads
a sample from program memory and writes it to the DAC. First, it disables the update of the DAC output by
clearing the RLDAC bit in the control register. Then it reads the MSW and the LSW from the waveform table
and stores it in the MSW and LSW register of the TLV5613. The write cycle is completed by setting the RLDAC
bit, which updates the DAC output. At the end of the interrupt service routine, the pointer to the waveform
samples is increased and is checked to determine if it has reached the end of the table. If the pointer has reached
the end of the table, the pointer is set to the start address of the table.
相關PDF資料 |
PDF描述 |
|---|---|
| TLV5614CDRG4 | SERIAL INPUT LOADING, 9 us SETTLING TIME, 12-BIT DAC, PDSO16 |
| TLV5614IDR | SERIAL INPUT LOADING, 9 us SETTLING TIME, 12-BIT DAC, PDSO16 |
| TLV5614CPW | SERIAL INPUT LOADING, 9 us SETTLING TIME, 12-BIT DAC, PDSO16 |
| TLV5614IPW | SERIAL INPUT LOADING, 9 us SETTLING TIME, 12-BIT DAC, PDSO16 |
| TLV5614IDRG4 | SERIAL INPUT LOADING, 9 us SETTLING TIME, 12-BIT DAC, PDSO16 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TLV5613DW | 制造商:TI 制造商全稱:Texas Instruments 功能描述:2.7 V TO 5.5 V 12-BIT PARALLEL DIGITAL-TO-ANALOG CONVERTER WITH POWER DOWN |
| TLV5613IDW | 功能描述:數模轉換器- DAC 12bit CMOS DAC RoHS:否 制造商:Texas Instruments 轉換器數量:1 DAC 輸出端數量:1 轉換速率:2 MSPs 分辨率:16 bit 接口類型:QSPI, SPI, Serial (3-Wire, Microwire) 穩定時間:1 us 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-14 封裝:Tube |
| TLV5613IDWG4 | 功能描述:數模轉換器- DAC 12B DAC RoHS:否 制造商:Texas Instruments 轉換器數量:1 DAC 輸出端數量:1 轉換速率:2 MSPs 分辨率:16 bit 接口類型:QSPI, SPI, Serial (3-Wire, Microwire) 穩定時間:1 us 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-14 封裝:Tube |
| TLV5613IDWR | 功能描述:數模轉換器- DAC 12-Bit DAC Parallel Voltage Out RoHS:否 制造商:Texas Instruments 轉換器數量:1 DAC 輸出端數量:1 轉換速率:2 MSPs 分辨率:16 bit 接口類型:QSPI, SPI, Serial (3-Wire, Microwire) 穩定時間:1 us 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-14 封裝:Tube |
| TLV5613IDWRG4 | 功能描述:數模轉換器- DAC 12-Bit DAC Parallel Voltage Out RoHS:否 制造商:Texas Instruments 轉換器數量:1 DAC 輸出端數量:1 轉換速率:2 MSPs 分辨率:16 bit 接口類型:QSPI, SPI, Serial (3-Wire, Microwire) 穩定時間:1 us 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-14 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。