
www.ti.com
FEATURES
Linear Charger Management for Single Li-Ion
or Li-Polymer Cells
Dual Input Ports for Charging From USB or
From Wall Plug, Handles 100-mA / 500-mA
USB Requirements
Charge Current Programmable via External
Resistor
1-A, 95% Efficient Step-Down Converter for
I/O and Peripheral Components (VMAIN)
400-mA, 90% Efficient Step-Down Converter
for Processor Core (VCORE)
2x 200-mA LDOs for I/O and Peripheral
Components, LDO Enable via Bus
Serial Interface Compatible With I
2
C, Supports
100-kHz, 400-kHz Operation
LOW_PWR Pin to Lower or Disable Processor
Core Supply Voltage in Deep Sleep Mode
70-μA Quiescent Current
1% Reference Voltage
Thermal Shutdown Protection
DESCRIPTION
The TPS65014 is an integrated power and battery
management IC for applications powered by one
Li-ion or Li-polymer cell and which require multiple
power rails. The TPS65014 provides two highly
efficient, step-down converters targeted at providing
the core voltage and peripheral, I/O rails in a
processor-based system. Both step-down converters
enter a low power mode at light load for maximum
efficiency across the widest possible range of load
currents. The LOW_PWR pin allows the core con-
verter to lower its output voltage when the application
processor goes into deep sleep. The TPS65014 also
integrates two 200-mA LDO voltage regulators, which
are enabled via the serial interface. Each LDO
operates with an input voltage range between 1.8 V
and 6.5 V, allowing them to be supplied from one of
the step-down converters or directly from the battery.
APPLICATIONS
All Single Li-Ion Cell-Operated Products
Requiring Multiple Supplies Including:
– PDA
– Cellular/Smart Phone
– Internet Audio Player
– Digital Still Camera
Digital Radio Player
Split Supply DSP and μP Solutions
TPS65014
SLVS551–DECEMBER 2004
POWER AND BATTERY MANAGEMENT IC
FOR LI-ION POWERED SYSTEMS
The TPS65014 also has a highly integrated and
flexible Li-Ion linear charger and system power man-
agement.
It
offers
integrated
ac-adapter supply management with autonomous
power-source selection, power FET and current
sensor, high accuracy current and voltage regulation,
charge status, and charge termination.
USB-port
and
The TPS65014 charger automatically selects the
USB-port or the ac-adapter as the power source for
the system. In the USB configuration, the host can
increase the charge current from the default value of
maximum 100 mA to 500 mA via the interface. In the
ac-adapter configuration, an external resistor sets the
maximum value of charge current.
The battery is charged in three phases: conditioning,
constant current, and constant voltage. Charge is
normally terminated based on minimum current. An
internal charge timer provides a safety backup for
charge termination. The TPS65014 automatically
restarts the charge if the battery voltage falls below
an internal threshold. The charger automatically en-
ters sleep mode when both supplies are removed.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
I
2
C is a trademark of Phillips.
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright 2004, Texas Instruments Incorporated