- 您現在的位置：買賣IC網 > PDF目錄383583 > MCP1256 (Microchip Technology Inc.) Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode PDF資料下載
參數資料
| 型號： | MCP1256 |
| 廠商： | Microchip Technology Inc. |
| 英文描述： | Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode |
| 中文描述： | 3.3V的穩壓，低紋波充電泵具有低工作電流睡眠模式或旁路模式 |
| 文件頁數： | 1/24頁 |
| 文件大小： | 1183K |
| 代理商： | MCP1256 |
2006 Microchip Technology Inc.
DS21989A-page 1
MCP1256/7/8/9
Features
Inductorless 1.5x, 2x Boost DC/DC Converter
Output Voltage: 3.3V
High Output Voltage Accuracy:
- ±3.0% (V
OUT
Fixed)
Output Current Up To 100 mA
20 mV
PP
Output Voltage Ripple
Thermal Shutdown and Short Circuit Protection
Uses Small Ceramic Capacitors
Switching Frequency: 650 kHz
Low-Power SLEEP Mode: MCP1256/7
BYPASS Mode: MCP1258/9
Low-Power Shutdown Mode: 0.1
μ
A (Typical)
Shutdown Input Compatible with 1.8V Logic
V
IN
Range: 1.8V to 3.6V
Soft-Start Circuitry to Minimize Inrush Current
Temperature Range: -40°C to +125°C
Packaging:
- 10-Pin, 3 mm x 3 mm DFN
- 10-Pin, MSOP
Applications
Pagers
Portable Measurement Instruments
Home Automation Products
PICmicro
MCU Bias
Typical Application
Description
The MCP1256, MCP1257, MCP1258 and MCP1259
are inductorless, positive regulated charge pump
DC/DC converters. The devices generate a regulated
3.3V output voltage from a 1.8V to 3.6V input. The
devices are specifically designed for applications
operating from 2-cell alkaline, Ni-Cd, or Ni-MH
batteries or by one primary lithium MnO2 (or similar)
coin cell battery.
The MCP1256, MCP1257, MCP1258 and MCP1259
provide high efficiency by automatically switching
between 1.5x and 2x boost operation. In addition, at
light output loads, the MCP1256 and MCP1257 can be
placed in a SLEEP mode, lowering the quiescent
current while maintaining the regulated output voltage.
Alternatively, the MCP1258 and MCP1259 provide a
BYPASS feature connecting the input voltage to the
output.
This
allows
microcontrollers or other system devices to remain
biased with virtually no current being consumed by the
MCP1258 or MPC1259.
for
real-time
clocks,
In normal operation, the output voltage ripple is below
20 mV
PP
at load currents up to 100 mA. Normal opera-
tion occurs at a fixed switching frequency of 650 kHz,
avoiding interference with sensitive IF bands.
The MCP1256 and MCP1258 feature a power-good
output that can be used to detect out-of-regulation
conditions. The MCP1257 and MCP1259 feature a low-
battery indication that issues a warning if the input
voltage drops below a preset voltage threshold.
Extremely low supply current and few external parts (4
capacitors) make these devices ideal for small, battery-
powered applications. A Shutdown mode is also
provided for further power reduction.
The devices incorporate thermal and short-circuit pro-
tection. Two package offerings are provided: 10-pin
MSOP and 10-lead 3 mm x 3 mm DFN. The devices
are completely characterized over the junction temper-
ature range of -40°C to +125°C.
PGOOD
GND
SHDN
1
2
3
4
MCP1256
V
OUT
5
6
7
8
9
10
V
IN
SLEEP
C
IN
10
μ
F
C
OUT
10
F
C
1
-
C
1
+
C
1
1
μ
F
C
2
-
C
2
+
C
2
1
μ
F
R
1
INPUT
OUTPUT
3.3V
Power-Good
Indication
ON / OFF
Typical Application with Power-Good Indication
Regulated 3.3V, Low-Ripple Charge Pump with Low-
Operating Current SLEEP Mode or BYPASS Mode
相關PDF資料 |
PDF描述 |
|---|---|
| MCP1256-EMF | Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode |
| MCP1256-EUN | Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode |
| MCP1256T-EMF | Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode |
| MCP1256T-EUN | Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode |
| MCP1257 | Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MCP1256/7/8/9EV | 功能描述:電源管理IC開發工具 MCP1256/7/8/9 Eval Brd RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:Battery Management 工具用于評估:MAX17710GB 輸入電壓: 輸出電壓:1.8 V |
| MCP1256_13 | 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode |
| MCP1256-E/MF | 功能描述:電荷泵 Frac Charge Pump w/ PG and Sleep RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 輸出電壓:- 1.5 V to - 5.5 V, 3 V to 11 V 輸出電流:100 mA 電源電流:1 mA 最大工作溫度:+ 70 C 封裝 / 箱體:SOIC-8 Narrow 封裝:Tube |
| MCP1256-E/UN | 功能描述:電荷泵 Frac Charge Pump w/ PG and Sleep RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 輸出電壓:- 1.5 V to - 5.5 V, 3 V to 11 V 輸出電流:100 mA 電源電流:1 mA 最大工作溫度:+ 70 C 封裝 / 箱體:SOIC-8 Narrow 封裝:Tube |
| MCP1256-EMF | 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode |
發布緊急采購，3分鐘左右您將得到回復。