
Bel Fuse Inc.
206 Van Vorst Street, Jersey City, NJ 07302
Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 14 Vdc Input
0.8 Vdc - 5.5 Vdc/8 A Output
Non-Isolated
Remote On/Off
Fixed Frequency
Under-voltage Lockout (UVLO)
High Efficiency
OCP/SCP
High Power Density
Low Cost
Wide Trim Range
UL60950-1 Recognized (UL/cUL)
Description
The Bel xRAH-08Exxx modules are a series of non-isolated, step down dc/dc converters that operate from 4.5
Vdc to14 Vdc source. These converters are available in a range of output voltages from 0.8 Vdc to 5.5 Vdc. It is
packaged in a compact, overmolded package rated at 8 A. Optional lead forming provides a vertical mount
product for minimal footprint or a surface mount option for a very low profile. The output is closely regulated and
the efficiency for 5 Vdc output is typically 93% at full load.
Part Selection
Output
Voltage
Input
Voltage
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Part Number
Surface Mount
Part Number
Vertical Mount
0.8 V - 3.63 V
4.5 V - 14 V
8 A
26.4 W
91%
SRAH-08E1A0
VRAH-08E1A0
4.5 V - 5.5 V
8 V - 14 V
8 A
44 W
93%
SRAH-08E500
VRAH-08E500
Notes:
1. Add “0” suffix at the end of the model number to indicate “Tube Packaging”, and “R” for “Reel
Packaging”, and “G” for “Tray Packaging”.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
Input Voltage (continuous)
-0.3 V
-
15 V
Output Enable Terminal Voltage
-0.3 V
-
14 V
Ambient Temperature
-40
°C
-
85
°C
Storage Temperature
-55
°C
-
125
°C
Input Specifications
Parameter
Min
Typ
Max
Notes
Input Voltage
Vo=4.5 V-5.5 V
Vo=0.9 V-3.63 V
8.0 V
4.5 V
-
14 V
Input Current (full load)
Vo=5.0 V
VO=3.3 V
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=0.9 V
-
5.4 A
6.7 A
5.3 A
3.2 A
3.0 A
2.8 A
2.0 A
Input Current (no load)
-
100 mA
Remote Off Input Current
-
3 mA
10 mA
Input Reflected Ripple Current (pk-pk)
-
250 mA
-
Input Reflected Ripple Current (rms)
-
70 mA
-
With simulated source impedance of 500 nH,
5 Hz to 20 MHz; use two 47 uF/16 V low ESR
Tantalum capacitors.
xRAH-08E Series
RoHS Compliant
Rev.A