
112
RFI CERAMIC DISC CAPACITORS
Suppression Capacitors
Class X1 AC 440 V
Class Y2 AC 250 V
WKO
Design:
Disc capacitor with epoxy coating
Rated Voltage U
R
:
X1
AC 440 V; 50 Hz
Y2
AC 250 V; 50/60 Hz
Test Voltage U
T
:
Component test:
AC 2500 V / 50 Hz, 2 s
As repeated voltage test admissible
only once at: AC 2250 V / 50 Hz, 2 s
Random Sampling Test:
AC 2500 V / 50 Hz, 60 s
Voltage Proof of Coating:
AC 2500 V / 50 Hz, 60 s
Dissipation Factor tan
δ
:
≤
25 x 10
–3
Insulation Resistance R
i
:
for C
≤
0,33 μF
≤
6 x 10
9
Temperature Characteristic acc.
to EN 130 700:
2 E 3
Category Temperature Range
δ
u
:
(–40 ...+ 85) oC acc.to IEC 384-14/1
(–40 ...+ 125) oC acc.to IEC 384-14/2
Climatic Testing Class acc.
to EN 60068-1:
40/085/21 acc.to IEC 384-14/1
40/125/21 acc.to IEC 384-14/2
Coating:
Epoxy, dipped, insulating, flame
retarding (UL 94V0)
Important:
Minimum thickness of 0,4 mm for the
epoxy coating is now confirmed by the
VDE-approval board in Germany
Taping:
on request
Special Lead Configurations:
on request
Dimensions in mm
additional on the label:
all approval marks
Marking:
D
≥
10 mm
additional on the label:
all approval marks
Marking:
D
≤
9 mm
Soldering Recommendations:
When soldering this component to a PC board, the
solder heat resistance specification of the capacitor
must not be exceeded.
Subjecting this component to excessive heating could
melt the internal solder junction and may cause
thermal stress that can crack the ceramic element.
In order to keep a sufficient distance between solder
wave and the capacitor element we recommend to
use capacitor styles with crimped leads.