- 您現在的位置：買賣IC網 > PDF目錄364013 > WSH411-XPC2 (Winson Semiconductor Corp.) Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function PDF資料下載
參數資料
| 型號： | WSH411-XPC2 |
| 廠商： | Winson Semiconductor Corp. |
| 英文描述： | Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| 中文描述： | 霍爾效應傳感器IC與熱鎖保護和自動重啟功能 |
| 文件頁數： | 1/11頁 |
| 文件大小： | 166K |
| 代理商： | WSH411-XPC2 |
WSH411
Winson reserves the right to make changes to improve reliability or manufacturability.
Hall Effec t S ensor IC with T hermal Lock Protec tion
and Auto Restart Function
Features:
Operate from 2.8V to 20V supply voltage.
On-chip Hall sensor.
Internal bandgap regulator allows temperature compensated operations and a
wide operating voltage range.
High output sinking capability up to
500mA
for driving large load.
Lower current change rate reduces the peak output voltages during switching.
Available in rugged low profile SOT-25 , SIP-4L packages.
Built-in
FG
output.
Built-in protection diode for reverse power supply fault.
Built-in
thermal lock protection
and
auto-restart
function.
General Desc ription:
WSH411 is designed to integrate Hall sensor with complementary output drivers and
frequency generator together on the same chip, it is suitable for speed measurement,
revolution counting, positioning, and DC brushless motors. It includes a temperature
compensated voltage regulator, a differential amplifier, a Hysteresis controller, two
open-collector output drivers capable of sinking 1A current load and an open-collector
frequency generator capable of sinking 10mA current load. An on-chip protection
diode is implemented to prevent reverse power fault.And built-in
thermal lock
protection
and
auto-restart
function is suitable for super high speed fan. It can replace
the function of lock protection and auto restart function. The power will be shutdown
automatically at 135
°
C to prevent the coils be damaged and atuo-restart after cooling
down.
The temperature-dependent bias increases the supply voltage of the hall plates and
adjusts the switching points to the decreasing induction of magnets at higher
temperatures. Subsequently, the open collector output switches to the appropriate state.
WSH411 are rated for operation over temperature range from
–
20
C to 100
C and
voltage ranges from 2.8V to 20V.
Winson, 2005/8/12 1
相關PDF資料 |
PDF描述 |
|---|---|
| WSH411-XPC3 | Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| WSH411-XPD1 | Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| WSH411-XPD2 | Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| WSH411-XPD3 | Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| WSH412 | Hall Effect Sensor IC with Thermal Lock Protection and Auto-restart Function |
相關代理商/技術參數 |
參數描述 |
|---|---|
| WSH411-XPC3 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| WSH411-XPD1 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| WSH411-XPD2 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| WSH411-XPD3 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function |
| WSH412 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Hall Effect Sensor IC with Thermal Lock Protection and Auto-restart Function |
發布緊急采購，3分鐘左右您將得到回復。