- 您現在的位置：買賣IC網 > PDF目錄364014 > WSH610 (Winson Semiconductor Corp.) Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function PDF資料下載
參數資料
| 型號： | WSH610 |
| 廠商： | Winson Semiconductor Corp. |
| 英文描述： | Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| 中文描述： | 霍爾雙鎖步保護及自動重啟動功能效應集成電路 |
| 文件頁數： | 1/8頁 |
| 文件大小： | 163K |
| 代理商： | WSH610 |
WSH610
Winson reserves the right to make changes to improve reliability or manufacturability.
Hall Effec t IC with T wo-Step Lock Protec tion and
Auto-Restart Func tion
Features:
Operate from 2.8V to 20V supply voltage.
On-chip Hall sensor.
Internal bandgap regulator allows temperature compensated operations and a
wide operating voltage range.
High output sinking capability up to
600mA
for driving large load.
Available in rugged low profile SOT-25 , SIP-4L packages.
Built-in protection diode for reverse power supply fault.
Built-in
2-Step
Lock protection
and
auto-restart
function.
General Desc ription:
WSH610 is designed to integrate Hall sensor with complementary output drivers and
2-Step thermal protection circuit together on the same chip. It is carefully designed to
protect DC brushless motors to operate on different fault operating condition.
WSH610 can detect whether motor is in locked or operating condition then trigger the
low or high temperature protection to protect motor under safety operating zone. This
technique allows motors to operate as high temperature as 125
°
C and keep motor
under 80
°
C low temperature when motor is locked. And all above protection will be
disabled when fault condition is removed and motor will be auto-restarted.
WSH610 includes two open collector output drivers, each capable of sinking 600mA
current load. An on-chip protection diode is implemented to prevent reverse power
fault. Its 2-step protection can replace traditional lock protection and auto restart
function but without EMI noise and any external components with much lower cost.
The temperature-dependent bias increases the supply voltage of the hall plates and
adjusts the switching points to the balance the influence of magnets at higher
temperatures. WSH610 are rated for operation on wide temperature range from
–
20
C to 125
C and voltage ranges from 2.8V to 20V.
Winson, 2006/3/13
1
相關PDF資料 |
PDF描述 |
|---|---|
| WSH610-XPAN1 | Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPAN2 | Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPAN3 | Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPDN1 | Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPDN2 | Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
相關代理商/技術參數 |
參數描述 |
|---|---|
| WSH610-XPAN1 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPAN2 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPAN3 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPDN1 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPDN2 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
發布緊急采購，3分鐘左右您將得到回復。