- 您現在的位置：買賣IC網 > PDF目錄371301 > X9428YS-2.7 Single Digitally Controlled Potentiometer PDF資料下載
參數資料
| 型號： | X9428YS-2.7 |
| 元件分類： | 數字電位計 |
| 英文描述： | Single Digitally Controlled Potentiometer |
| 中文描述： | 單數字電位器 |
| 文件頁數： | 1/20頁 |
| 文件大小： | 580K |
| 代理商： | X9428YS-2.7 |
REV 1.1.5 7/8/03
Characteristics subject to change without notice.
1 of 20
www.xicor.com
X9428
Single Digitally Controlled Potentiometer (XDCP
)
FEATURES
Solid state potentiometer
2-wire serial interface
Register oriented format
—Direct Read/Write/Transfer Wiper Position
—Store as many as Four Positions per
Potentiometer
Power supplies
—V
CC
= 2.7V to 5.5V
—V+ = 2.7V to 5.5V
—V– = –2.7V to –5.5V
Low power CMOS
—Standby current < 1μA
—Ideal for Battery Operated Applications
High reliability
—Endurance–100,000 Data Changes per Bit per
Register
—Register Data Retention–100 years
4-bytes of nonvolatile memory
10K Ohm resistor array
Resolution: 64 taps each potentiometer
SOIC and TSSOP packages
DESCRIPTION
The
potentiometers (XDCP) on a monolithic CMOS
integrated microcircuit.
X9428
integrates
a
digitally
controlled
The digitally controlled potentiometer is implemented
using 63 resistive elements in a series array. Between
each element are tap points connected to the wiper
terminal through switches. The position of the wiper on
the array is controlled by the user through the 2-wire
bus interface. Each potentiometer has associated with
it a volatile Wiper Counter Register (WCR) and 4
nonvolatile Data Registers (DR0:DR3) that can be
directly written to and read by the user. The contents of
the WCR controls the position of the wiper on the
resistor array through the switches. Power up recalls
the contents of DR0 to the WCR.
The XDCP can be used as a three-terminal
potentiometer or as a two-terminal variable resistor in
a wide variety of applications including control,
parameter adjustments, and signal processing.
BLOCK DIAGRAM
R0 R1
R2 R3
Wiper
Counter
Register
(WCR)
Interface
and
Control
Circuitry
SCL
SDA
A0
A2
A3
V
H
/R
H
V
L
/R
L
Data
8
V
W
/R
W
WP
V
CC
V
SS
V+
V–
Low Noise/Low Power/2-Wire Bus
A
PPLICATION
N
OTES
A V A I L A B L E
AN99 AN115 AN120 AN124 AN133 AN134 AN135
相關PDF資料 |
PDF描述 |
|---|---|
| X9428YP-2.7 | CAT5E PATCH CORD 20 FOOT BEIGE |
| X9428WVI-2.7 | Single Digitally Controlled Potentiometer |
| X9428WV-2.7 | Single Digitally Controlled Potentiometer |
| X9428WSI-2.7 | Single Digitally Controlled Potentiometer |
| X9428WPI-2.7 | TRANS PREBIASED NPN 150MW SOT523 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X9428YSI | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Single Digitally Controlled Potentiometer |
| X9428YSI-2.7 | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Single Digitally Controlled Potentiometer |
| X9428YSM | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Industrial Control IC |
| X9428YSM2.7 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Industrial Control IC |
| X9428YV | 制造商:XICOR 制造商全稱:Xicor Inc. 功能描述:Single Digitally Controlled Potentiometer |
發布緊急采購，3分鐘左右您將得到回復。