
Material Safety Data Sheet
Part No. 1500
2-TON CLEAR EPOXY HARDENER
Page 1
ITW Devcon
2-TON CLEAR EPOXY HARDENER
Last revised:
12/04/98
Printed:
04/29/99
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Chemical family
Polyamine adduct
The following health hazard data pertain to the hardener only. When fully cured, the mixed
product is non-hazardous.
General information:
ITW Devcon
30 Endicott St.
Danvers, MA 01923
MANUFACTURER
EMERGENCY INFORMATION
Emergency telephone number
(CHEMTREC) (800) 424-9300
Other calls:
(978) 777-1100
2. COMPOSITION/INFORMATION ON INGREDIENTS
Exposure limits
HAZARDOUS CONSTITUENTS
Constituent
Abbr.
CAS No.
Weight
percent
ACGIH
TLV
OSHA
PEL
Other
Limits
Aminoethylpiperazine
AEP
140318
< 50
n/e
Nonylphenol
25154523
> 30
n/e
"TLV" means the Threshold Limit Value exposure (eight-hour, time-weighted average, unless otherwise noted) as established by the
American Conference of Governmental Industrial Hygienists. "STEL" indicates a short-term exposure limit. "PEL" indicates the OSHA
Permissible Exposure Limit. "n/e" indicates that no exposure limit has been established. An asterisk (*) indicates a substance whose
identity is a trade secret of our supplier and unknown to us.
3. HAZARDS IDENTIFICATION
Emergency Overview
Danger! Corrosive. Severe eye, skin, respiratory tract irritant (evidenced by itching, redness,
burning sensation). Potential skin sensitizer. Avoid breathing vapors. Use with adequate
ventilation. Do not take internally. Wash thoroughly after handling.
Appearance, physical form, odor: Amber liquid with ammonia-like, fishy odor.
Inhalation
Eye contact
Symptoms of acute overexposure:
Skin:
Eyes:
Severe irritation or burns, necrosis and permanent
injury.
Potential health effects:
Severe irritation or burns. May cause lacrimation,
conjunctivitis, corneal damage and may cause
permanent injury.
Primary routes of exposure:
Skin contact
Skin absorption
Ingestion
courqr0420