
Material Safety Data Sheet
Part No. 1500
2-TON CLEAR EPOXY HARDENER
Page 4
ITW Devcon
9. PHYSICAL AND CHEMICAL PROPERTIES
Specific gravity:
0.97
Melting point (°F):
n/d
Vapor pressure (mmHg):
<1mm Hg
VOC (grams/liter):
0
Percent volatile by volume:
100
Percent solids by weight:
Boiling point (°F):
>430
at 77 °F
Vapor density (air = 1):
>1
Evaporation rate (butyl acetate = 1): <1
Solubility in water:
Completely
pH (5% solution or slurry in water): 10.5-11.5
0
10. STABILITY AND REACTIVITY
This product is chemically stable.
Hazardous polymerization will not occur.
Conditions to avoid:
Incompatible materials:
Extreme heat or open flame
Strong oxidizing agents (i.e. percchlorates,
nitrates), acids (i.e. chromerge) and chlorinated
organic compounds.
Hazardous decomposition products:
Conditions of hazardous polymerization:
Acrid and toxic smoke, organic amines, carbon
and nitrogen oxides, nitriles, cyanic acid,
isocyanates, cyanogens, nitrosamines, amides,
carbamates. Ammonia when heated.
Heat is generated when mixed with epoxy resin.
Use caution when mixing large quantities.
11. TOXICOLOGICAL INFORMATION
Acute oral effects:
Acute dermal effects
Not available.
> 2000 mg/kg (estimate)
LD50 (rat):
LD50 (rabbit):
Acute inhalation effects:
Eye irritation:
Not available.
LC50 (rat): No data
in 0 hours
Subchronic effects
Chronic effects
Not available.
Carcinogenicity, teratogenicity, and mutagenicity:
Nonyphenol has caused allergic sensitization in humans.
Toxicological information on hazardous chemical constituents of this product:
Constituent
Oral LD50
Inhalation LC50
(rat)
Dermal LD50
(rabbit)
(rat, 4 hours)
Aminoethylpiperazine
2140 mg/kg
900 mg/kg
n/d
Nonylphenol
1620 mg/kg
2140 mg/kg
>1 mg/L
12. ECOLOGICAL INFORMATION
Ecotoxicity:
Not available.
courqr0420