參數資料
| 型號： | 19226 |
| 廠商： | Desco |
| 文件頁數： | 1/4頁 |
| 文件大小： | 0K |
| 描述： | MONITR CONTINUOUS MULTI-MNT 120V |
| 產品目錄繪圖： | 19226 |
| 標準包裝： | 1 |
| 類型： | 工作站監視器 |
| 使用： | 工作面，腕帶監視 |
| 特點： | 連續監視，NIST 可追溯，單芯系統 |
| 電源類型： | AC 適配器 |
| 包括： | AC 適配器，證書，軟線，五金件 |
| 其它名稱： | 16-1116 |
The Multi-Mount Continuous Monitor is a real time
instrument that ensures that critical ESD generators in a
sensitive area are effectively grounded. The instant an
operator’s wrist strap or cord fails, the monitor will issue
audible and visual (LEDs) alarms alerting the user and
supervisor of the problem.
The Parking Snap features provides a means for the
operator to disconnect wrist strap cord when normally
leaving work area without audible alarm sounding. It also
provides a means of wrist strap storage.
ADVANTAGES OF CONTINUOUS MONITORING
OVER PERIODIC TESTING
Many customers are eliminating periodic testing and
are utilizing continuous monitoring to better ensure that
their products were manufactured in an ESD protected
environment. Full time continuous monitoring is superior
to periodic or pulsed testing, and can save a significant
amount of money in testing costs and rejected product.
Periodic testing detects failures after ESD susceptible
products have been manufactured. The costs of dealing
with the resulting catastrophic or latent defects can be
considerable. Multi-Mount Continuous Monitors eliminate
the need for users to test wrist straps and log the results;
by their function, these monitors satisfy the ISO 9000
and ANSI/ESD S20.20 test logging. ANSI/ESD S20.20
Paragraph 6.2.2.2 Personnel Grounding Guidance states “A
log should be maintained which verifies that personnel have
tested their personal grounding devices.” Per ESD-S1.1
Paragraph 6.1.3 “Daily (wrist strap system) testing may be
omitted if constant monitoring is used.”
WAVE DISTORTION DETECTION TECHNOLOGY
PROVIDES TRUE 100% CONTINUOUS MONITORING
From all the technical alternatives available, Desco
has chosen wave distortion technology for many of its
Continuous Monitor product offerings. Wave distortion
circuitry monitors current/voltage phase shifts and provides
true 100% continuous monitoring. Electrical current will
lead voltage at various points due to the combinations of
resistance and capacitive reactance. By monitoring these
“distortions” or phase shifts, the wave distortion Multi-Mount
Continuous Monitor will reliably determine if the circuit is
complete.
Wave distortion technology can be referred to “vector
impedance monitoring”. This description is valid as the
wave distortion technology measures the impedance at the
monitored banana jack and looks for changes in either the
capacitance or resistance of the circuit which includes the
wrist strap and its wearer. It uses filtering and time domain
sampling to filter out false signals caused by voltage offsets,
60 Hz fields and other electro-magnetic and electrostatic
interference.
TB-3028 April 2011 Page 1 of 4
Multi-Mount Continuous Monitor
Operation, Installation, and Maintenance
Figure 1. Desco Multi-Mount Continuous Monitor
Description
Leading companies use continuous monitors as a cost
effective component in satisfying the paragraph 6.1.3
Compliance Verification Plan requirements of ANSI/
ESD S20.20. The Desco Multi-Mount Continuous Monitor
continuously monitors the integrity of one operator. This
monitor will provide virtually instantaneous notification
of static control equipment failures, eliminating the need
of periodic testing and costly record keeping. This unit
is highly cost effective as it is designed to monitor any
conventional single wire wrist strap and ground cord
system. Its small package and mounting tabs with holes
make it highly suitable to install on most any equipment
or work bench surface. In addition, optional mounting is
available using the provided adhesive-backed Velcro
strips. Using either mounting method makes the
Multi-Mount Monitor suitable for most any machinery or
workbench even in hard to reach locations.
The Desco Multi-Mount Continuous Monitor is available in
two models:
Model
Voltage AC
Calibration
120
NIST
220
NIST
TECHNICAL BULLETIN TB-3028
Made in America
2011 DESCO INDUSTRIES INC.
Employee Owned
DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Fax (909) 627-7449
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Fax (781) 575-0172 Web Site: Desco.com
相關PDF資料 |
PDF描述 |
|---|---|
| 19228 | MONITOR CONT MULTI-MOUNT |
| 19230 | MONITOR DUAL WORKSTATION 120V |
| 19232 | MONITOR W/SPLIT REMOTE MOD 120V |
| 19240 | WRISTSTRAP TESTER 9V OPERATION |
| 19245 | TESTER LOW RESISTANCE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 19-226/R6BHC-B01/2T(WSN) | 制造商:Everlight 功能描述:LED |
| 19-226/R6G7C-A01/2T | 功能描述:標準LED-SMD Multi Chip LED RoHS:否 制造商:Vishay Semiconductors 封裝 / 箱體:0402 LED 大小:1 mm x 0.5 mm x 0.35 mm 照明顏色:Red 波長/色溫:631 nm 透鏡顏色/類型:Water Clear 正向電流:30 mA 正向電壓:2 V 光強度:54 mcd 顯示角:130 deg 系列:VLMx1500 封裝:Reel |
| 19-226/R6GHC-A03/2T | 制造商:Everlight Electronics Co 功能描述:LED Bi-Color Green/Red 518nm/632nm 4-Pin Chip LED T/R 制造商:Everlight Electronics CO., LTD 功能描述:LED Bi-Color Green/Red 518nm/632nm 4-Pin Chip LED T/R |
| 1922608 | 功能描述:可插拔接線端子 PCV 6-16/ 6-GF-10.16 RoHS:否 制造商:Phoenix Contact 產品:Plugs 系列:PTS 端接類型:Spring Cage 位置/觸點數量:5 線規量程:26-14 節距:5 mm 電流額定值:10 A 電壓額定值:250 V 安裝風格: 安裝角: 觸點電鍍: |
| 1922611 | 功能描述:可插拔接線端子 PCV 6-16/ 7-GF-10.16 RoHS:否 制造商:Phoenix Contact 產品:Plugs 系列:PTS 端接類型:Spring Cage 位置/觸點數量:5 線規量程:26-14 節距:5 mm 電流額定值:10 A 電壓額定值:250 V 安裝風格: 安裝角: 觸點電鍍: |
發布緊急采購，3分鐘左右您將得到回復。