- 您現在的位置：買賣IC網 > PDF目錄68796 > 5962-8990503EA (TEXAS INSTRUMENTS INC) 2.2 A SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, CDIP16 PDF資料下載
參數資料
| 型號： | 5962-8990503EA |
| 廠商： | TEXAS INSTRUMENTS INC |
| 元件分類： | 穩壓器 |
| 英文描述： | 2.2 A SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, CDIP16 |
| 封裝： | DIP-16 |
| 文件頁數： | 18/19頁 |
| 文件大小： | 623K |
| 代理商： | 5962-8990503EA |
8
GROUND PLANES
Each output driver of these devices is capable of 2A peak
currents. Careful layout is essential for correct operation of
the chip. A ground plane must be employed. A unique sec-
tion of the ground plane must be designated for high di/dt
currents associated with the output stages. This point is the
power ground to which the PGND pin is connected. Power
ground can be separated from the rest of the ground plane
and connected at a single point, although this is not strictly
necessary if the high di/dt paths are well understood and
accounted for. VCC should be bypassed directly to power
ground with a good high frequency capacitor. The sources
UC1823A,B/1825A,B
UC2823A,B/2825A,B
UC3823A,B/3825A,B
of the power MOSFET should connect to power ground
as should the return connection for input power to the sys-
tem and the bulk input capacitor. The output should be
clamped with a high current Schottky diode to both VCC
and PGND. Nothing else should be connected to power
ground.
VREF should be bypassed directly to the signal portion
of the ground plane with a good high frequency capaci-
tor. Low ESR/ESL ceramic 1
F capacitors are recom-
mended for both VCC and VREF. All analog circuitry
should likewise be bypassed to the signal ground plane.
APPLICATIONS INFORMATION (cont.)
UDG-95115
UNITRODE INTEGRATED CIRCUITS
7 CONTINENTAL BLVD.
MERRIMACK, NH 03054
TEL.(603) 424-2410
FAX (603) 424-3460
grounding and bypass procedures should be followed.
The use of a ground plane is highly recommended.
Open Loop Test Circuit
This test fixture is useful for exercising many of the
UC3823A,B, UC3825A,B functions and measuring their
specifications. As with any wideband circuit, careful
UDG-95116
相關PDF資料 |
PDF描述 |
|---|---|
| 5962-8997301PA | OP-AMP, 6000 uV OFFSET-MAX, CDIP8 |
| 5962-8997301PX | OP-AMP, 6000 uV OFFSET-MAX, 179 MHz BAND WIDTH, CDIP8 |
| 5962-8997401PA | OP-AMP, CDIP8 |
| 5962-9060001PA | OP-AMP, 9000 uV OFFSET-MAX, CDIP8 |
| 5962-90604042A | QUAD OP-AMP, 3750 uV OFFSET-MAX, 0.525 MHz BAND WIDTH, CQCC20 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 5962-8991501UA | 制造商:Microsemi Corporation 功能描述:5962-8991501UA - Rail/Tube |
| 5962-8992001VX | 制造商: 功能描述: 制造商:undefined 功能描述: |
| 5962-89920022A | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| 59628992501EA | 制造商:TI 功能描述:SNJ54LS378J |
| 5962-8992501EA | 制造商:Texas Instruments 功能描述:Flip Flop D-Type Bus Interface Pos-Edge 1-Element 16-Pin CDIP Tube 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Texas Instruments 功能描述:FLIP FLOP D-TYPE BUS INTRFC POS-EDGE 1-ELEM 16CDIP - Rail/Tube |
發布緊急采購，3分鐘左右您將得到回復。