- 您現在的位置：買賣IC網 > PDF目錄68803 > 70IMX7-24-24-9 (POWER-ONE INC) 2-OUTPUT 7.2 W DC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | 70IMX7-24-24-9 |
| 廠商： | POWER-ONE INC |
| 元件分類： | 電源模塊 |
| 英文描述： | 2-OUTPUT 7.2 W DC-DC REG PWR SUPPLY MODULE |
| 封裝： | 2 X 1 INCH, 10.50 MM HEIGHT, MA-9 |
| 文件頁數： | 11/15頁 |
| 文件大小： | 213K |
| 代理商： | 70IMX7-24-24-9 |
IMX 7 DC/DC Series Data Sheet
7W Board Mountable Converter
REV. OCT 01, 2003
5/15
IMX SERIES
Input Transient Voltage Protection
In many applications transient voltages on the input of the
converter are always possible. These may be caused for ex-
ample by short circuits between Vi+ and Vi– where the net-
work inductance may cause high energy pulses.
In order to protect the converters the IMX 7 types have a
built-in transient protection as per table below:
Reverse Polarity Protection at Input
The suppressor diode on the input also provides for re-
verse polarity protection by conducting current in the re-
verse direction, thus protecting the unit. An external fuse is
required to limit this current:
– For 20 IMX 7 a fast 2 A (F2A) fuse is recommended.
– For 40 IMX 7 a fast 1 A (F1A) fuse is recommended.
– For 70 IMX 7 a fast 0.63 A (F.63A) fuse is recommended.
– For 110 IMX 7 a fast 0.63 A (F.63A) fuse is recommended.
Inrush Current
The inrush current has been kept as low as possible by
choosing a very small input capacitance. A series resistor
may be inserted in the input line to limit this current further.
Vi+
Vi–
07064
C
L
D
+
i
Fig. 4
Example for external circuitry to comply with
IEC/EN 61000-4-5, level 2 (transzorb D not necessary for
40/70/110 IMX 7 types).
Table 3: Built-in transient voltage suppressor
Type
Breakdown
Peak Power
Peak Pulse
Voltage
at 1 ms
Current
VBR nom
PP
IPP
20 IMX 7 1
over voltage lockout at approx. 38 V
40 IMX 7 2
100 V
1500 W
11 A
70 IMX 7 2
144 V
600 W
2.9 A
110 IMX 7 2
167 V
600 W
2.5 A
1 The built-in overvoltage lockout circuit shuts down the converter
at approx. 38 V protecting the input up to 50 V DC. For higher
transient voltages an external suppressor or voltage limiting
circuit as e.g. for IEC/EN 61000-4-5, level 2 compliance should
be provided.
2 If transients generating currents above the peak pulse current
are possible then an external limiting network such as the circuit
recommended for IEC/EN 61000-4-5, level 2 compliance is
necessary.
Table 4: Components for external circuitry to comply with IEC/EN 61000-4-5
Circuit Ref.
20 IMX 7
40 IMX 7
70 IMX 7
110 IMX 7
L
330
H, 0,115 , 1 A
330
H, 0,42 , 600 mA
1000
H, 2.9 , 290 mA
330
H, 0.65 , 430 mA
TDK SF-T8-110S-01
TDK TSL1110-331KR55
Toko 822LY-102K
Toko 822LY-331K
C
68
F, 63 V, 85°C
68
F, 100 V, 85°C
47
F, 150 V, 85°C
200
F, 200 V, 105°C
D
Motorola 1.5KE39A
n.a.
To achieve IEC/EN 61000-4-5, level 2 compliance an addi-
tional inductor and capacitor should be provided externally
as shown in the figure below. The components should have
similar characteristics as listed in table: Components for
external circuitry to comply with IEC/EN 61000-4-5.
Please note: The suppressor diode D is only necessary for
20 IMX 7 types. To withstand 150 V transients according to
19 Pfl 1, applicable for 40 IMX 7 types, the same external
circuitry with similar components as for IEC/EN 61000-4-5,
level 2 compliance can be used.
1 A/Div.
10
s/Div.
04030
0
1
2
3
4
Fig. 5
Typical inrush current at Vi nom, Po nom vs. time (40 IMX 7)
measured according to prETS 300132-2 (Version 4.3)
相關PDF資料 |
PDF描述 |
|---|---|
| 70IMX7-05-9 | 1-OUTPUT 6.1 W DC-DC REG PWR SUPPLY MODULE |
| 70IMX7-05-8G | 1-OUTPUT 6.1 W DC-DC REG PWR SUPPLY MODULE |
| 110IMX7-03-8Z | 1-OUTPUT 5 W DC-DC REG PWR SUPPLY MODULE |
| 110IMX7-12-12-8Z | 2-OUTPUT 7.2 W DC-DC REG PWR SUPPLY MODULE |
| 110IMX7-05-8Z | 1-OUTPUT 6.1 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 70J00000Z | 功能描述:保險絲 3.5A Black/White 125VAC 300VDC RoHS:否 制造商:Littelfuse 產品:Surface Mount Fuses 電流額定值:0.5 A 電壓額定值:600 V 保險絲類型:Fast Acting 保險絲大小/組:Nano 尺寸:12.1 mm L x 4.5 mm W 安裝風格: 端接類型:SMD/SMT 系列:485 |
| 70J1G032P502U | 制造商:Honeywell Sensing and Control 功能描述: |
| 70J1G032P504A | 制造商:Honeywell Sensing and Control 功能描述: |
| 70J1G032S103A | 功能描述:工業移動感應器和位置傳感器 RESISTIVE & OPTICAL RoHS:否 制造商:Honeywell 輸出類型:Analog - Current 電壓額定值:12 VDC to 30 VDC 線性:+/- 0.0011 % 溫度范圍:- 40 C to + 85 C 總電阻: 容差: 類型:Rotary Sensor |
| 70J1G032S103U | 功能描述:工業移動感應器和位置傳感器 RESISTIVE & OPTICAL RoHS:否 制造商:Honeywell 輸出類型:Analog - Current 電壓額定值:12 VDC to 30 VDC 線性:+/- 0.0011 % 溫度范圍:- 40 C to + 85 C 總電阻: 容差: 類型:Rotary Sensor |
發布緊急采購，3分鐘左右您將得到回復。