- 您現在的位置：買賣IC網 > PDF目錄68810 > 7106G-R40-T (UNISONIC TECHNOLOGIES CO LTD) 1-CH PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO40 PDF資料下載
參數資料
| 型號： | 7106G-R40-T |
| 廠商： | UNISONIC TECHNOLOGIES CO LTD |
| 元件分類： | ADC |
| 英文描述： | 1-CH PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO40 |
| 封裝： | HALOGEN FREE, SSOP-40 |
| 文件頁數： | 5/18頁 |
| 文件大小： | 438K |
| 代理商： | 7106G-R40-T |
7106
CMOS IC
UNISONICTECHNOLOGIESCO.,LTD
13 of 18
www.unisonic.com.tw
QW-R502-018.D
DETAILED DESCRIPTION(Cont.)
Reference Capacitor
A 0.1μF capacitor gives good results in most applications. However, where a large common mode voltage exists
(i.e.,the REF LO pin is not at analog COMMON)and a 200mV scale is used, a larger value is required to prevent
roll-ovre error. Generally 1μF will hold the roll-over error to 0.5 count in this instance.
Oscillator Components
For all ranges of frequency a 91k resistor is recommended and the capacitor is selected from the equation:
f= 0.45/RC For 48kHz Clock (3 Readings/sec), C=100pF.
Reference Voltage
The analog input required to generate full scale output (2000 counts) is: VIN=2VREF.Thus, for the 200mV and 2V
scale, VREF should equal 100mV and 1V, respectively. However, in many applications where the A/D is connected to
a transducer, there will exist a scale factor other than unity between the input voltage and the digital reading. For
instance, in a weighing system, the designer might like to have a full scale reading when the voltage from the
transducer is 0.662V. Instead of dividing the input down to 200mV, the designer should use the input voltage directly
and select VREF=0.341V. Suitable values for integrating resistor and capacitor would be 120k and 0.22μF. This
makes the system slightly quieter and also avoids a divider network on the input.
相關PDF資料 |
PDF描述 |
|---|---|
| 7170100205 | INTERCONNECTION DEVICE |
| 7170100260 | INTERCONNECTION DEVICE |
| 7170100261 | INTERCONNECTION DEVICE |
| 71M6113-IL/F | SPECIALTY ANALOG CIRCUIT, PDSO8 |
| 71M6201-IL/F | SPECIALTY ANALOG CIRCUIT, PDSO8 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 7106L-D40-T | 制造商:UTC-IC 制造商全稱:UTC-IC 功能描述:3 ? DIGIT, LCD DISPLAY, A/D CONVERTERS |
| 7106L-QM1-Y | 制造商:UTC-IC 制造商全稱:UTC-IC 功能描述:3 ? DIGIT, LCD DISPLAY, A/D CONVERTERS |
| 7106L-R40-R | 制造商:UTC-IC 制造商全稱:UTC-IC 功能描述:3 ? DIGIT, LCD DISPLAY, A/D CONVERTERS |
| 7106L-R40-T | 制造商:UTC-IC 制造商全稱:UTC-IC 功能描述:3 ? DIGIT, LCD DISPLAY, A/D CONVERTERS |
| 7106MQ | 制造商:Apex Tool Group 功能描述:HANDLE,WORK STA,7190 |
發布緊急采購，3分鐘左右您將得到回復。