- 您現在的位置：買賣IC網 > PDF目錄68810 > 7106L-R40-T (UNISONIC TECHNOLOGIES CO LTD) 1-CH PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO40 PDF資料下載
參數資料
| 型號： | 7106L-R40-T |
| 廠商： | UNISONIC TECHNOLOGIES CO LTD |
| 元件分類： | ADC |
| 英文描述： | 1-CH PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO40 |
| 封裝： | LEAD FREE, SSOP-40 |
| 文件頁數： | 18/18頁 |
| 文件大小： | 438K |
| 代理商： | 7106L-R40-T |
7106
CMOS IC
UNISONICTECHNOLOGIESCO.,LTD
9 of 18
www.unisonic.com.tw
QW-R502-018.D
DETAILED DESCRIPTION(Cont.)
ANALOG COMMON
This pin is included primarily to set the common mode voltage for battery operation (UTC 7106) or for any system
where the input signals are floating with respect to the power supply. The COMMON pin sets a voltage that is
approximately 2.8V more negative than the positive supply. This is selected to give a minimum end-of-life battery
voltage of about 6V. However, analog COMMON has some of the attributes of a reference voltage. When the total
supply voltage is large enough to cause the zener to regulate(>7V), the COMMON voltage will have a low voltage
coefficient (0.001%/V), low output impedance ( 15
≒
), and a temperature coefficient typically less than 80ppm/℃.
The UTC 7106, with its negligible dissipation, suffers from none of these problems. In either case, an external
reference can easily be added, as shown in Figure 2.
Analog COMMON is also used as the input low return during auto-zero and de-integrate. If IN LO is different from
analog COMMON, a common mode voltage exists in the system and is taken care of by the excellent CMRR of the
converter. However, in some applications IN LO will be set at a fixed known voltage(power supply common for
instance).In this application, analog COMMON should be tied to the same point, thus removing the common mode
voltage from the converter. The same holds true for the reference voltage. If reference can be conveniently tied to
analog COMMON, it should be since this removes the common mode voltage from the reference system.
Within the IC, analog COMMON is tied to an N-Channel FET that can sink approximately 30mA of current to hold
the voltage 2.8V below the positive supply (when a load is trying to pull the common line positive). However, there is
only 10μA of source current, so COMMON may easily be tied to a more negative voltage thus overriding the internal
reference.
Iz
6.8V
ZENER
V-
V+
V
REF HI
REF LO
UTC 7106
COMMON
REF LO
REF HI
UTC 7106
V
20k
6.8k
ICL8069
V+
1.2V
REFERENCE
FIGURE 2B.
FIGURE 2 A.
Figure 2. Using an External Reference
相關PDF資料 |
PDF描述 |
|---|---|
| 7106G-D40-T | 1-CH PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDIP40 |
| 7106L-R40-R | 1-CH PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO40 |
| 7106L-QM1-Y | 1-CH PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP44 |
| 7106G-R40-T | 1-CH PROPRIETARY METHOD ADC, PARALLEL ACCESS, PDSO40 |
| 7170100205 | INTERCONNECTION DEVICE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 7106MQ | 制造商:Apex Tool Group 功能描述:HANDLE,WORK STA,7190 |
| 7106PD | 制造商:Aavid Thermalloy 功能描述:- Bulk 制造商:Aavid Thermalloy 功能描述:Heat Sink Passive D2 PAK/TO-263/SO-10/MO-184 Surface Mount 15?C/W Pre Tin |
| 7106PD/TR | 制造商:Aavid Thermalloy 功能描述:HEAT SINK PASSIVE SO-10/TO-263 SMD 15 C/W PRE TIN - Tape and Reel 制造商:Aavid Thermalloy 功能描述:Heat Sink Passive SO-10/TO-263 Surface Mount 15°C/W Pre Tin |
| 7106-RC | 功能描述:共模濾波器/扼流器 0.51mH 2amp RoHS:否 制造商:TDK 電感: 阻抗:35 Ohms 容差: 最大直流電流:0.1 A 最大直流電阻:1.5 Ohms 自諧振頻率: Q 最小值: 工作溫度范圍:- 25 C to + 85 C 端接類型:SMD/SMT 封裝 / 箱體:0302 (0806 metric) 系列:TCE |
| 7106-SS | 功能描述:螺絲和緊固件 3/8 LNGTH 7/16 DIA WSHR FACE THMB SCREW RoHS:否 制造商:Unspecified 產品: 類型:Washer 螺紋大小: 長度: 材料:Steel 電鍍:Nickel 螺絲頭: 螺絲類型: |
發布緊急采購，3分鐘左右您將得到回復。