- 您現在的位置：買賣IC網 > PDF目錄36331 > 935173940112 (NXP SEMICONDUCTORS) 1 CHANNEL, VIDEO AMPLIFIER, PZFM9 PDF資料下載
參數資料
| 型號： | 935173940112 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 音頻／視頻放大 |
| 英文描述： | 1 CHANNEL, VIDEO AMPLIFIER, PZFM9 |
| 封裝： | PLASTIC, SOT-111, DIL-BENT-SIL, 9 PIN |
| 文件頁數： | 16/18頁 |
| 文件大小： | 111K |
| 代理商： | 935173940112 |
1995 Feb 07
7
Philips Semiconductors
Preliminary specication
Video output amplier
TDA6101Q
Notes
1. If the difference between VDDL and Vip is less than 7 V, overshoot cannot be specified.
2. SVRR: The ratio of the change in supply voltage to the change in input voltage when there is no change in output
voltage.
Ov
cathode output voltage overshoot
VocAC = 100 V (p-p);
VocDC = 100 V square
wave; f < 1 MHz;
tr =tf =40ns;
see Figs 4 and 5; note 1
9
%
SVRRH
high supply voltage rejection ratio
f < 50 kHz; note 2
85
dB
SVRRL
low supply voltage rejection ratio
f < 50 kHz; note 2
70
dB
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
Cathode output
The cathode output is protected against peak currents
(caused by positive voltage peaks during high-resistance
flash) of 5 A maximum with a charge content of 100
C.
The cathode is also protected against peak currents
(caused by positive voltage peaks during low-resistance
flash) of 10 A maximum with a charge content of 100 nC.
Flashover protection
The TDA6101Q incorporates protection diodes against
CRT flashover discharges that clamp the cathode output
pin to the VDDH pin. The DC supply voltage at the VDDH pin
has to be within the operating range of 180 to 210 V to
ensure that the Absolute Maximum Rating for VDDH of
250 V will not be exceeded during flashover. To limit the
diode current, an external 820
carbon high-voltage
resistor in series with the cathode output and a 2 kV spark
gap are needed (for this resistor-value, the CRT has to be
connected to the main PCB). This addition produces an
increase in the rise and fall times of approximately 5 ns
and a decrease in the overshoot of approximately 3%.
VDDH to GND must be decoupled:
1. With a capacitor >20 nF with good HF behaviour
(e.g. foil). This capacitance must be placed as close
as possible to pins 6 and 4, but definitely within 5 mm.
2. With a capacitor >10
F on the picture tube base print
(common for three output stages).
VDDL to GND must be decoupled:
1. With a capacitor >20 nF with good HF behaviour
(e.g. ceramic). This capacitance must be placed as
close as possible to pins 2 and 4, but definitely within
10 mm.
Switch-off behaviour
The switch-off behaviour of the TDA6101Q is defined:
when the bias current becomes zero, at VDDL (pin 2) lower
than approximately 5 V, all the output pins
(pins 7, 8 and 9) will be high.
相關PDF資料 |
PDF描述 |
|---|---|
| 935173950112 | 1 CHANNEL, VIDEO AMPLIFIER, PZFM9 |
| 935174080557 | AM/FM, AUDIO SINGLE CHIP RECEIVER, PQFP44 |
| 935175870112 | TRIPLE 2-CHANNEL, SGL ENDED MULTIPLEXER, PDIP16 |
| 935175860118 | TRIPLE 2-CHANNEL, SGL ENDED MULTIPLEXER, PDSO16 |
| 935174970112 | TRIPLE 2-CHANNEL, SGL ENDED MULTIPLEXER, PDSO16 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 93518097J | 制造商:Fiskars Brands Inc 功能描述:Fiskars 45mm Rotary Blades - Pinking (Fits Models 195800/154570/19680/19583) (Fr |
| 935181002005 | 功能描述:電容套件 HiTmpSilCap Kit 0402 1nF 10nF 33nF BD11V RoHS:否 制造商:Nichicon 電容范圍:10 uF to 680 uF 公差范圍: 電壓范圍:6.3 V to 25 V 產品:Aluminum Organic Polymer Capacitor Kit |
| 935181002006 | 功能描述:電容套件 XtrTmpSilCapKit 0402 1nF 10nF 33nF BD11V RoHS:否 制造商:Nichicon 電容范圍:10 uF to 680 uF 公差范圍: 電壓范圍:6.3 V to 25 V 產品:Aluminum Organic Polymer Capacitor Kit |
| 935181002007 | 功能描述:電容套件 LPSC SilCap Kit 0402 1/10/33/100nF BD11V RoHS:否 制造商:Nichicon 電容范圍:10 uF to 680 uF 公差范圍: 電壓范圍:6.3 V to 25 V 產品:Aluminum Organic Polymer Capacitor Kit |
| 93518-410020 | 制造商:FCI 功能描述:CARD COVER |
發布緊急采購，3分鐘左右您將得到回復。