- 您現在的位置：買賣IC網 > PDF目錄373921 > AD7870SQ (ANALOG DEVICES INC) LC2MOS Complete, 12-Bit, 100 kHz, Sampling ADCs PDF資料下載
參數資料
| 型號： | AD7870SQ |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | ADC |
| 英文描述： | LC2MOS Complete, 12-Bit, 100 kHz, Sampling ADCs |
| 中文描述： | 12-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, CDIP24 |
| 封裝： | 0.300 INCH, HERMETIC SEALED, CERDIP-24 |
| 文件頁數： | 16/20頁 |
| 文件大?。?/td> | 331K |
| 代理商： | AD7870SQ |
REV. B
AD7870/AD7875/AD7876
–16–
SK T 5 is a 9-way D-type connector that is meant for serial inter-
facing only. An inverted DB9/SCLK output is also provided on
this connector for systems that accept data on a rising clock
edge. T he SK T 5 pinout is shown in Figure 27.
Figure 27. SKT5, D-Type Connector Pinout
SK T 1, SK T 2 and SK T 3 are three BNC connectors which pro-
vide input connections for the analog input, the
CONVST
input
and an external clock input. T he use of an external clock source
is optional; there is a shorting plug (LK 2) on the ADC CLK in-
put that must be connected to either –5 V (for the ADCs own
internal clock) or to SK T 3.
POWE R SUPPLY CONNE CT IONS
T he PCB requires two analog power supplies and one 5 V digi-
tal supply . T he analog supplies are labelled V+ and V–, and the
range for both supplies is 12 V to 15 V (see silkscreen in Figure
29). Connection to the 5 V digital supply is made through any
of the connectors (SK T 4 to SK T 6). T he –5 V supply required
by the ADC is generated from a voltage regulator on the V–
power supply input (IC3 in Figure 27).
SHORT ING PLUG OPT IONS
T here are seven shorting plug options that must be set before
using the board. T hese are outlined below:
LK 1 Connects the analog input to a buffer amplifier. T he
analog input may also be connected to a component grid
for signal conditioning.
LK 2 Selects either the ADC internal clock or an external
clock source.
LK 3 Configures the ADC 12/
8
/CLK input for the appropri-
ate serial or parallel interface.
LK 4 Connects the ADC
RD
input directly to the two parallel
connectors or to a decoded
STRB
and R
/W
input. T his
shorting plug setting depends on the microprocessor e.g.,
the T MS32010 has a separate
RD
output while the
T MS32020 has
STRB
and R/
W
outputs.
LK 5– Connect the pull-up resistors R3, R4 and R5 to
SSTRB
,
LK 7 SCLK and SDAT A. T hese shorting plugs should be
removed for parallel interfacing.
COMPONE NT LIST
IC1
IC2
AD711 Op Amp
AD7870/AD7875/AD7876 Analog-to-
Digital Converter
MC79L05 –5 V Regulator
74HC00 Quad NAND Gate
74HC74 Dual D-T ype Flip Flop
10
μ
F Capacitors
IC3
IC4
IC5
C1, C3, C5, C7,
C9, C11
C2, C4, C6, C8,
C10, C12
R1, R2
R3*, R5*
R4*
LK 1, LK 2
LK 3, LK 4
LK 5, LK 6, LK 7
SK T 1, SK T 2, SK T 3 BNC Sockets
SK T 4
SK T 5
SK T 6
*Required for Serial Communication only.
0.1
μ
F Capacitors
10 k
Pull-Up Resistors
4.7 k
Pull-Up Resistors
2 k
Pull-Up Resistor
Shorting Plugs
26-Contact (2-Row) IDC Connector
9-Contact D-T ype Connector
96-Contact (3-Row) Eurocard Connector
相關PDF資料 |
PDF描述 |
|---|---|
| AD7870TQ | LC2MOS Complete, 12-Bit, 100 kHz, Sampling ADCs |
| AD7876CN | 16-Bit, Pseudo Bipolar, Fully Diff Input, 250kSPS Serial Out, 2.7V to 5.5V Micro Power Sampling ADC 8-MSOP -40 to 85 |
| AD7876CQ | 16-Bit, Pseudo Bipolar, Fully Diff Input, 250kSPS Serial Out, 2.7V to 5.5V Micro Power Sampling ADC 8-MSOP -40 to 85 |
| AD7876CR | 16-Bit, Pseudo Bipolar, Fully Diff Input, 250kSPS Serial Out, 2.7V to 5.5V Micro Power Sampling ADC 8-MSOP -40 to 85 |
| AD7876TQ | 16-Bit, Pseudo Bipolar, Fully Diff Input, 250kSPS Serial Out, 2.7V to 5.5V Micro Power Sampling ADC 8-MSOP -40 to 85 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7870SQ/883B | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter， 12-Bit |
| AD7870SQQ10 | 制造商:Analog Devices 功能描述: |
| AD7870TE | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog to Digital Converter |
| AD7870TE/883B | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter， 12-Bit |
| AD7870TQ | 功能描述:模數轉換器 - ADC 12-Bit 100kHz Sampling RoHS:否 制造商:Analog Devices 通道數量: 結構: 轉換速率: 分辨率: 輸入類型: 信噪比: 接口類型: 工作電源電壓: 最大工作溫度: 安裝風格: 封裝 / 箱體: |
發布緊急采購，3分鐘左右您將得到回復。