- 您現在的位置：買賣IC網 > PDF目錄373924 > AD7892BR-1 (ANALOG DEVICES INC) LC2MOS Single Supply, 12-Bit 600 kSPS ADC PDF資料下載
參數資料
| 型號： | AD7892BR-1 |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | ADC |
| 英文描述： | LC2MOS Single Supply, 12-Bit 600 kSPS ADC |
| 中文描述： | 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL/PARALLEL ACCESS, PDSO24 |
| 封裝： | SOIC-24 |
| 文件頁數： | 13/14頁 |
| 文件大小： | 144K |
| 代理商： | AD7892BR-1 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁當前第13頁第14頁
AD7892
REV. C
–13–
Grounding and Layout
The AD7892 has a single supply voltage pin, V
DD
, which sup-
plies both the analog and digital circuitry on the part. For opti-
mum performance from the part, it is recommended that this
+5 V is taken from the +5 V analog supply in the system. The
analog and digital grounds to the AD7892 are independent and
separately pinned out to minimize coupling between the analog
and digital sections of the device. The part exhibits good immu-
nity to noise on the supplies but care must still be taken with
regard to grounding and layout especially when using switching
mode supplies.
The printed circuit board which houses the AD7892 should be
designed such that the analog and digital sections are separated
and confined to certain areas of the board. This facilitates the
use of ground planes which can be separated easily. A minimum
etch technique is generally best for ground planes as it gives the
best shielding. Digital and analog ground planes should only be
joined in one place. If the AD7892 is the only device requiring
an AGND to DGND connection, then the ground planes
should be connected at the AGND and DGND pins of the
AD7892. If the AD7892 is in a system where multiple devices
require AGND to DGND connections, the connection should
still be made at one point only, a star ground point which
should be established as close as possible to the AD7892.
Avoid running digital lines under the device as these will couple
noise onto the die. The analog ground plane should be allowed
to run under the AD7892 to avoid noise coupling. The power
supply lines to the AD7892 should use as large a trace as pos-
sible to provide low impedance paths and reduce the effects of
glitches on the power supply line. Fast switching signals like
clocks should be shielded with digital ground to avoid radiating
noise to other sections of the board and clock signals should
never be run near the analog inputs. Avoid crossover of digital
and analog signals. Traces on opposite sides of the board should
run at right angles to each other. This will reduce the effects of
feedthrough through the board. A microstrip technique is by far
the best but is not always possible with a double-sided board. In
this technique, the component side of the board is dedicated to
ground planes while signals are placed on the solder side.
Good decoupling is important when using high resolution ADCs.
All analog supplies should be decoupled with 10
μ
F tantalum in
parallel with 0.1
μ
F capacitors to AGND. To achieve the best
from these decoupling components, they have to be placed as
close as possible to the device, ideally right up against the device.
All logic chips should be decoupled with 0.1
μ
F disc ceramic
capacitors to DGND. It is recommended that the system’s
AV
DD
supply is used to supply the V
DD
for the AD7892. This
supply should have the recommended analog supply decoupling
capacitors between the V
DD
pin of the AD7892 and AGND and
the recommended digital supply decoupling capacitor between
the V
DD
pin of the AD7892 and DGND.
Evaluating the AD7892 Performance
The recommended layout for the AD7892 is outlined in the
evaluation board for the AD7892. The evaluation board package
includes a fully assembled and tested evaluation board, docu-
mentation and software for controlling the board from a PC
using the EVAL-CONTROL BOARD. The EVAL-CONTROL
BOARD can be used in conjunction with the AD7892 evalua-
tion board, as well as many other Analog Devices evaluation
boards ending in the CB designator. Using the EVAL-CONTROL
BOARD with the AD7892 evaluation board allows the user to
evaluate the ac and dc performance of the AD7892 on a PC.
The software provided with the evaluation board allows the user
to perform ac (Fast Fourier Transform) and dc (histogram of
codes) tests on the AD7892. The evaluation board can also
be used in a stand-alone fashion without the EVAL-CONTROL
BOARD but in this case, the user has to write their own software
to evaluate the part. There are two versions of the evaluation
board available, one for the AD7892-2 and one for the AD7892-3.
To order the AD7892-2 evaluation board, the order number is
EVAL-AD7892-2CB and to order the AD7892-3 evaluation
board, the order number is EVAL-AD7892-3CB.
相關PDF資料 |
PDF描述 |
|---|---|
| AD7892BR-2 | LC2MOS Single Supply, 12-Bit 600 kSPS ADC |
| AD7893AN-10 | RECTIFIER SCHOTTKY SINGLE 1A 80V 25A-ifsm 0.8V-vf 0.5mA-ir DO-41 5K/REEL-13 |
| AD7893AN-2 | RECTIFIER SCHOTTKY SINGLE 1A 80V 25A-ifsm 0.8V-vf 0.5mA-ir DO-41 1K/BULK |
| AD7893AN-5 | RECTIFIER SCHOTTKY SINGLE 1A 90V 25A-ifsm 0.8V-vf 0.5mA-ir DO-41 5K/AMMO |
| AD7893AR-10 | RECTIFIER SCHOTTKY DUAL 30A 35V 275A-ifsm 0.55V-vf 1mA-ir TO-3P 30/TUBE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7892BR-1REEL | 功能描述:IC ADC 12BIT LP 500KSPS 24-SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
| AD7892BR-1Z | 制造商:Analog Devices 功能描述:ADC 12BIT 500KSPS 1LSB 24S 制造商:Analog Devices 功能描述:ADC, 12BIT, 500KSPS, 1LSB, 24SOIC; Resolution (Bits):12bit; Sampling Rate:500kSPS; Supply Voltage Type:Single; Supply Voltage Min:4.75V; Supply Voltage Max:5.25V; Supply Current:18mA; Digital IC Case Style:SOIC; No. of Pins:24; Input;RoHS Compliant: Yes |
| AD7892BR-2 | 制造商:Rochester Electronics LLC 功能描述:12-BIT 500 KSPS PARALLEL ADC I.C. - Bulk |
| AD7892BR-2REEL | 制造商:Analog Devices 功能描述:ADC Single SAR 500ksps 12-bit Parallel/Serial 24-Pin SOIC W T/R |
| AD7892BR-2REEL7 | 制造商:Analog Devices 功能描述:ADC Single SAR 500ksps 12-bit Parallel/Serial 24-Pin SOIC W T/R 制造商:Rochester Electronics LLC 功能描述:12-BIT 500 KSPS PARALLEL ADC I.C. - Tape and Reel |
發布緊急采購，3分鐘左右您將得到回復。