- 您現在的位置：買賣IC網 > PDF目錄373945 > AD8362ARU-REEL7 (ANALOG DEVICES INC) 50 Hz to 2.7 GHz 60 dB TruPwr⑩ Detector PDF資料下載
參數資料
| 型號： | AD8362ARU-REEL7 |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 模擬信號調理 |
| 英文描述： | 50 Hz to 2.7 GHz 60 dB TruPwr⑩ Detector |
| 中文描述： | SPECIALTY ANALOG CIRCUIT, PDSO16 |
| 封裝： | MO-153AB, TSSOP-16 |
| 文件頁數： | 1/36頁 |
| 文件大小： | 700K |
| 代理商： | AD8362ARU-REEL7 |
當前第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁
50 Hz to 2.7 GHz
60 dB TruPwr Detector
AD8362
FEATURES
Complete fully calibrated measurement/control system
Accurate rms-to-dc conversion from 50 Hz to 2.7 GHz
Input dynamic range of >60 dB: 52 dBm to +8 dBm in 50
Waveform and modulation independent:
(Such as GSM/CDMA/TDMA)
Linear-in-decibels output, scaled 50 mV/dB
Law conformance error of 0.5 dB
All functions temperature and supply stable
Operates from 4.5 V to 5.5 V at 24 mA from 40°C to +85°C
Power-down capability to 1.3 mW
APPLICATIONS
Power amplifier linearization/control loops
Transmitter power control
Transmitter signal strength indication (TSSI)
RF instrumentation
Rev.
B
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
Tel: 781.329.4700Fax: 781.326.8703
FUNCTIONAL BLOCK DIAGRAM BIAS
x
2
VOUT
VSET
PWDN
COMM
VREF
AD8362
INHI
INLO
VTGT
VPOS
CLPF
CHPF
x
2
ACOM
DECL
0
Figure 1.
GENERAL DESCRIPTION
The AD8362 is a true rms-responding power detector that has a
60 dB measurement range. It is intended for use in a variety of
high frequency communication systems and in instrumentation
requiring an accurate response to signal power. It is easy to use,
requiring only a single supply of 5 V and a few capacitors. It can
operate from arbitrarily low frequencies to over 2.7 GHz and
can accept inputs that have rms values from 1 mV to at least
1 V rms, with peak crest factors of up to 6, exceeding the
requirements for accurate measurement of CDMA signals.
The input signal is applied to a resistive ladder attenuator
that comprises the input stage of a variable gain amplifier.
The 12 tap points are smoothly interpolated using a proprietary
technique to provide a continuously variable attenuator, which
is controlled by a voltage applied to the VSET pin. The resulting
signal is applied to a high performance broadband amplifier. Its
output is measured by an accurate square-law detector cell. The
fluctuating output is then filtered and compared with the output
of an identical squarer, whose input is a fixed dc voltage applied
to the VTGT pin, usually the accurate reference of 1.25 V
provided at the VREF pin.
The difference in the outputs of these squaring cells is
integrated in a high gain error amplifier, generating a voltage at
the VOUT pin with rail-to-rail capabilities. In a controller
mode, this low noise output can be used to vary the gain of a
host system’s RF amplifier, thus balancing the set point against
the input power. Optionally, the voltage at VSET may be a
replica of the RF signal’s amplitude modulation, in which case
the overall effect is to remove the modulation component prior
to detection and low-pass filtering. The corner frequency of the
averaging filter may be lowered without limit by adding an
external capacitor at the CLPF pin. The AD8362 can be used to
determine the true power of a high frequency signal having a
complex low frequency modulation envelope (or simply as a
low frequency rms voltmeter). The high-pass corner generated
by its offset-nulling loop can be lowered by a capacitor added
on the CHPF pin.
Used as a power measurement device, VOUT is strapped to
VSET, and the output is then proportional to the logarithm of
the rms value of the input; that is, the reading is presented
directly in decibels and is conveniently scaled 1 V per decade,
that is, 50 mV/dB; other slopes are easily arranged. In controller
modes, the voltage applied to VSET determines the power level
required at the input to null the deviation from the setpoint.
The output buffer can provide high load currents.
The AD8362 is powered down by a logic high applied to the
PWDN pin, i.e., the consumption is reduced to about 1.3 mW. It
powers up within about 20 μs to its nominal operating current
of 20 mA at 25°C. The AD8362 is supplied in a 16-lead TSSOP
package for operation over the industrial temperature range of
40°C to +85°C. An evaluation board is available.
相關PDF資料 |
PDF描述 |
|---|---|
| AD8362ARUZ-REEL71 | 50 Hz to 2.7 GHz 60 dB TruPwr⑩ Detector |
| AD8362ARUZ1 | 50 Hz to 2.7 GHz 60 dB TruPwr⑩ Detector |
| AD8367ARU-REEL | 500 MHz, Linear-in-dB VGA with AGC Detector |
| AD8367-EVAL | RECTIFIER STANDARD SINGLE 1A 50V 50 30A-ifsm 5uA-ir 1V-vf DO-41 5K/REEL-13 |
| AD8367ARU-REEL-7 | 500 MHz, Linear-in-dB VGA with AGC Detector |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD8362ARUZ | 功能描述:IC PWR DETECTOR 3.8GHZ 16-TSSOP RoHS:是 類別:RF/IF 和 RFID >> RF 檢測器 系列:- 產品變化通告:Product Discontinuation 15/May/2006 標準包裝:3,000 系列:- 頻率:100MHz ~ 2GHz RF 型:手機，GSM，DCS，PCS 輸入范圍:- 精確度:- 電源電壓:2.7 V ~ 5.5 V 電流 - 電源:300µA 包裝:帶卷 (TR) 封裝/外殼:SC-74，SOT-457 其它名稱:NCS5000SNT1GOS |
| AD8362ARUZ | 制造商:Analog Devices 功能描述:RMS Detector IC |
| AD8362ARUZ1 | 制造商:AD 制造商全稱:Analog Devices 功能描述:50 Hz to 2.7 GHz 60 dB TruPwr⑩ Detector |
| AD8362ARUZ-REEL7 | 功能描述:IC PWR DETECTOR 3.8GHZ 16-TSSOP RoHS:是 類別:RF/IF 和 RFID >> RF 檢測器 系列:- 產品變化通告:Product Discontinuation 15/May/2006 標準包裝:3,000 系列:- 頻率:100MHz ~ 2GHz RF 型:手機，GSM，DCS，PCS 輸入范圍:- 精確度:- 電源電壓:2.7 V ~ 5.5 V 電流 - 電源:300µA 包裝:帶卷 (TR) 封裝/外殼:SC-74，SOT-457 其它名稱:NCS5000SNT1GOS |
| AD8362ARUZ-REEL71 | 制造商:AD 制造商全稱:Analog Devices 功能描述:50 Hz to 2.7 GHz 60 dB TruPwr⑩ Detector |
發布緊急采購，3分鐘左右您將得到回復。