
ADCMP580/ADCMP581/ADCMP582
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
SUPPLY VOLTAGES
Positive Supply Voltage
(V
CCI
to GND)
Negative Supply Voltage
(V
EE
to GND)
Logic Supply Voltage
(V
CCO
to GND)
INPUT VOLTAGES
Input Voltage
Differential Input Voltage
Input Voltage, Latch Enable
HYSTERESIS CONTROL PIN
Applied Voltage (HYS to V
EE
)
Maximum Input/Output Current
OUTPUT CURRENT
ADCMP580 (CML)
ADCMP581 (NECL)
ADCMP582 (PECL)
TEMPERATURE
Operating Temperature, Ambient
Operating Temperature, Junction
Storage Temperature Range
Rev. 0 | Page 6 of 16
Rating
0.5 V to +6.0 V
–6.0 V to +0.5 V
0.5 V to +6.0 V
3.0 V to +4.0 V
2 V to +2 V
2.5 V to +5.5 V
5.5 V to +0.5 V
1 mA
25 mA
40 mA
40 mA
40°C to +125°C
125°C
65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods may
affect device reliability.
THERMAL CONSIDERATIONS
The ADCMP580/ADCMP581/ADCMP582 LFCSP 16-lead
package option has a θ
JA
(junction-to-ambient thermal
resistance) of 70°C/W in still air.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.