- 您現在的位置：買賣IC網 > PDF目錄373996 > ADM1070ART (ANALOG DEVICES INC) -48 V Hot Swap Controller PDF資料下載
參數資料
| 型號： | ADM1070ART |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 電源管理 |
| 英文描述： | -48 V Hot Swap Controller |
| 中文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6 |
| 封裝： | PLASTIC, MO-178AB, SOT-23, 6 PIN |
| 文件頁數： | 12/16頁 |
| 文件大小： | 367K |
| 代理商： | ADM1070ART |
REV. 0
–12–
ADM1070
FUNCTIONALITY AND TIMING
Live Insertion
The timing waveforms associated with the live insertion of a
plug-in board using the ADM1070 are shown in the following
figures. When the board connects the GND-V
EE
potential
climbs to 48 V. As this voltage is applied, the voltage at the V
IN
Pin ramps above the undervoltage lockout (V
LKO
) of 8.5 V to a
constant 12.3 V and is held at this level with the shunt resistor
and external resistor combination at the V
IN
Pin.
When UV/OV crosses the undervoltage rising threshold of
0.91 V, it is now inside the operating voltage window and the
–48 V supply must be applied to the load. After a time delay,
t
POR
, the ADM1070 begins to ramp up the gate drive. When the
voltage on the SENSE Pin reaches 100 mV (the analog current
limit) the gate drive is held constant. When the board capaci-
tance is fully charged, the sense voltage begins to drop below
the analog current limit voltage and the gate voltage is free to
ramp up further. The gate voltage eventually reaches its maxi-
mum value of 12.3 V (as set by V
IN
).
GND-V
EE
t
POR
V
IN
UV/OV
GATE
SENSE
V
OUT
V
LKO
V
UVR
Figure 5. Timing Waveforms Associated with a
Live Insertion Event
GATE
SENSE
V
OUT
CH2
5.00V
10.00V
CH1
CH3
100mV
M 500 s
CH1
2.8V
T
T
Figure 6. Start-Up Sequence
OVERVOLTAGE AND UNDERVOLTAGE
The waveforms for an overvoltage glitch are shown below.
When UV/OV glitches above the overvoltage rising threshold of
1.97 V, an overvoltage condition is detected and the gate volt-
age is pulled low. UV/OV begins to drop a back toward the
operating voltage window and the gate drive is restored when
the overvoltage falling threshold of 1.93 V is reached. Figure 7
illustrates the ADM1070’s operation in an overvoltage situation.
GATE
SENSE
V
UV/OV
CH2
10.00V
1.00V
CH1
CH3
100mV
M 200 s
CH3
1.96V
T
T
Figure 7. Timing Waveforms Associated with an
Overvoltage Glitch
An undervoltage glitch is dealt with in a similar way. When
V
UV/OV
falls below the undervoltage falling threshold of 0.86 V,
the gate voltage is pulled low. If UO/UV subsequently rises
back above the undervoltage rising threshold of 0.91 V, then the
gate voltage is restored. Figure 8 illustrates the ADM1070’s
operation in an undervoltage situation.
GATE
SENSE
V
UV/OV
CH2
10.0V
1.00V
CH1
CH3
100mV
M 200ms
Figure 8. Timing Waveforms Associated with an
Undervoltage Glitch
相關PDF資料 |
PDF描述 |
|---|---|
| ADM1072ARQ | Dual, USB 2.0 Full/Standby Power Controller with Supply Steering |
| ADM1085 | Simple Sequencers in 6-Lead SC70 |
| ADM1085AKS-REEL7 | Simple Sequencers in 6-Lead SC70 |
| ADM1086 | Simple Sequencers in 6-Lead SC70 |
| ADM1086AKS-REEL7 | Simple Sequencers in 6-Lead SC70 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADM1070ART-REEL | 制造商:Analog Devices 功能描述:Hot Swap Controller 1-CH -80V 6-Pin SOT-23 T/R 制造商:Analog Devices 功能描述:6-PIN -48V HOT SWAP CONTROLLER I.C. - Tape and Reel 制造商:Rochester Electronics LLC 功能描述:6-PIN -48V HOT SWAP CONTROLLER I.C. - Tape and Reel |
| ADM1070ART-REEL7 | 功能描述:IC CTRL HOTSWAP -48 SOT23-6 RoHS:否 類別:集成電路 (IC) >> PMIC - 熱交換 系列:- 標準包裝:50 系列:- 類型:熱交換控制器 應用:-48V 遠程電力系統，AdvancedTCA ? 系統，高可用性 內部開關:無 電流限制:可調 電源電壓:11.5 V ~ 14.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP，10-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:10-MSOP 包裝:管件 |
| ADM1070ARTZ-REEL | 功能描述:IC CTRLR HOTSWAP -48V SOT23-6 RoHS:是 類別:集成電路 (IC) >> PMIC - 熱交換 系列:- 標準包裝:50 系列:- 類型:熱交換控制器 應用:-48V 遠程電力系統，AdvancedTCA ? 系統，高可用性 內部開關:無 電流限制:可調 電源電壓:11.5 V ~ 14.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP，10-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:10-MSOP 包裝:管件 |
| ADM1070ARTZ-REEL7 | 功能描述:IC CTRLR HOTSWAP -48V SOT23-6 RoHS:是 類別:集成電路 (IC) >> PMIC - 熱交換 系列:- 標準包裝:50 系列:- 類型:熱交換控制器 應用:-48V 遠程電力系統，AdvancedTCA ? 系統，高可用性 內部開關:無 電流限制:可調 電源電壓:11.5 V ~ 14.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP，10-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:10-MSOP 包裝:管件 |
| ADM1070EB | 制造商:AD 制造商全稱:Analog Devices 功能描述:ADM1070 Hot Swap Controller Evaluation Kit Documentation |
發布緊急采購，3分鐘左右您將得到回復。